Buying a 70 mm Wooden Garden House: When to Consider Thicker Walls
Garden house buying guide
Choosing a 70 mm wooden garden house is not simply a matter of buying the thickest wall available. That measurement can help you compare construction, but it does not tell you by itself how a building will perform, what it includes or whether it suits your site. Weigh it alongside your intended use, complete specifications, usable space, preparation needs and order details.
What the 70 mm figure describes
On a product sheet, 70 mm (about 2.76 inches) should be read as the stated wall thickness, not as a summary of the whole building. Confirm whether it refers to the timber boards, whether the same figure applies to every wall, and whether it describes a nominal or finished dimension. A clear drawing can show where the measurement is taken and how boards meet at the corners. If the wording is vague, ask the seller to identify the measured component before comparing models. On a page such as the Verdana 1 garden house listing, locate the specification itself rather than inferring thickness from the model name or product image.
Check that each option uses the same measurement convention: one listing may give a board dimension while another describes a completed wall component. Ask whether the profile, corner joints or separate framing affect the quoted figure. The number alone does not identify timber species, joinery, finish, roof or floor construction, insulation, or a performance rating. Those details belong in separate parts of the specification. Also find out whether advertised dimensions are external or internal. With the same outside footprint, thicker walls can leave less clear floor area, depending on the layout—a practical difference if shelving or furniture has to fit.
When thicker walls may suit your plans
Begin with what the building needs to do. For tools and garden supplies, list your largest items, the space needed to reach them, and whether you want shelving or a work surface. For a place to sit or pursue a hobby, account for furniture, circulation and how you expect to use the space through the year. Consider how often the building will be occupied, whether it must remain easy to access when the garden is wet, and whether its contents need protection from changing conditions. This turns a general preference for substantial walls into a concrete comparison: what part of the construction matters to your use, and what else must the building provide? A 70 mm figure may belong on your shortlist when thicker walls are a genuine priority, but it does not replace checking the layout, openings and full construction.
Separate requirements from preferences. You may value a more substantial wall build, but whether a particular design delivers the construction you want must be established from its documentation, not assumed from thickness. If the building will be used only occasionally, ask whether the extra wall dimension addresses a real need in your plan. Apply the same checklist to the Verdana 2 garden house page: review the published configuration and compare it with your requirements rather than treating a product name as a statement of suitability. Keep other options in the comparison if they meet the same practical needs; a larger number is not automatically a better match.
Wall thickness and cooler-season use
Wall thickness is not an insulation value. The 70 mm figure alone does not tell you how comfortable a garden house will be, whether it is intended for winter use, or how it handles changing conditions. Those questions depend on the complete assembly, including the roof, floor, doors, windows, seals, ventilation and any insulation specified, as well as conditions at your site. If you want to use the building beyond mild weather, look for explicit manufacturer information about its construction and intended use. Do not infer year-round suitability from a larger wall measurement or a product photograph.
Check whether insulation is included, optional or simply not described, and ask what the listed construction actually covers. Consider the roof and floor as carefully as the walls; an upgraded wall cannot answer questions about the rest of the enclosure. Also consider how the room will be used on cool, damp, or windy days, rather than basing the decision solely on the warmest part of the year. If you expect regular cold-weather use or have demanding local exposure, request a complete specification and have a qualified professional assess whether the proposed building suits your plans. On the Durano garden house listing, check only the details explicitly published about the configuration and seasonal use. If those points are missing, ask rather than filling gaps with assumptions.
How timber and joints affect the comparison
A thickness figure is only one measure of wall construction. Find out what wood is specified, how the boards are profiled, how corners join, and whether the wall is a single system or includes separate framing. Ask for assembly drawings or product documentation if a listing uses broad descriptions without explaining them. These details let you compare construction on its own terms and prevent a nominal dimension from being treated as evidence of a particular strength, lifespan or weather resistance. If the manufacturer publishes maintenance or finish guidance, include it in your ownership decision; timber protection and care are separate questions from board thickness.
Think about the exposure your garden house will face, then check the manufacturer’s information for relevant limits and care requirements. A product image cannot show how a wall is assembled or protected. If wind, snow, ground conditions or another site concern matters, request written suitability guidance from the manufacturer or a qualified building professional; do not use 70 mm as a substitute for a load rating or professional assessment. The Veltor 1 garden house page is one listing to inspect for stated construction and care information, not a basis for assuming details that are not published.
Compare the rest of the building separately
Evaluate openings and other components on their own merits. Door width and height, thresholds, windows, glazing, locks and how openings operate all affect how you use the building; wall thickness does not establish any of those details. Measure the route and the objects that need to pass through the doorway. Think through where an opened door or window will be in relation to a path, seating, stored items, and the approach to the building. Check which opening arrangements are included in the exact configuration you plan to buy, since versions within a product family may differ. When online descriptions give only general information, ask for drawings with dimensions so you can judge access and placement before ordering.
Review the roof and floor separately as well. Confirm which roof covering, floor parts, hardware, glazing and finish are included or offered as extras; do not assume the advertised footprint equals usable interior space. A Orello 1 product page can be checked for its specific component information, but rely on the written details for the version you select. Make a list and mark each item as included, optional or separately sourced. This helps prevent a comparison between a 70 mm shell and a more complete package from making the two orders appear equivalent when their contents differ.
Match the footprint to your garden
Sketch the proposed location before choosing a footprint. Mark the building’s outside dimensions, paths, gates, fences, trees and existing features, and leave room for entry and regular access. Compare external and internal measurements because wall thickness and layout affect clear floor area. Plan around the items and activities you actually have in mind: check that storage, a bench or a small table will not obstruct the doorway. Include the space needed to move around furniture, open doors, and maintain the exterior. If you expect to add shelves or furniture later, include them in the layout now rather than assuming the whole floor will remain open.
Allow for assembly access as well as the finished building. Check the route from the delivery point to the site, gate width and overhead obstructions, and ask how much clear working space is needed while components are handled. Verify overall height, roof projection and door swing in the product drawings where available; do not estimate them from a photograph. Use the Modano 1 garden house listing as a page to look for dimensioned drawings, then compare its stated measurements with your sketch. If an important dimension or assembly clearance is missing, have it confirmed before arranging the site.
Plan the base and site preparation
Include the base in your purchase plan. Read the manufacturer’s foundation and site-preparation instructions, and identify what the kit requires beneath it. Requirements can vary by design and site, so do not choose a slab, frame or other base solely because it worked for another garden building. Ask about levelness, support, anchoring and whether a separate floor is needed. If the instructions do not resolve these questions, consult a qualified contractor or building professional before construction. Wall thickness cannot tell you what foundation a particular model needs.
Check the ground for drainage and water movement, and do not assume that a lawn that looks level is a prepared base. Consider where rainwater will flow and whether the position allows access for maintenance. If local approvals, property restrictions or placement limits may apply, confirm them with the relevant local authority or a qualified professional before committing to delivery; requirements depend on the location. When reviewing the Veltor 2 garden house listing, look for the manufacturer’s site and base guidance, then request instructions for the selected configuration if they are not shown. Site preparation is easier to plan before the kit arrives.
Confirm the order and delivery details
Price the complete project, not just the wall specification. Read the itemized contents to see which building parts, fasteners, floor or roof elements, glazing, finish and instructions are included, and which items require a separate purchase. Ask whether the stated dimensions describe the kit or the finished structure, and whether the configuration shown is the one in your order. Account for any site work, finishing, tools, contractor labor or handling that applies to your plan, using actual quotes rather than estimates made from a product image. Compare totals only after the scope is matched.
Confirm delivery terms, unloading arrangements, access requirements, assembly responsibility and the seller’s process if a package is incomplete or damaged. Check delivery timing directly before coordinating contractors or site preparation, rather than relying on an old screenshot or a general product-family description. On the Veltor 3 garden house page, review the order information that applies to that exact item and ask which documents and components accompany it. Keep the order confirmation, drawings and assembly instructions together so you can compare the chosen specification with the kit that arrives.
Compare complete specifications
Create a like-for-like comparison sheet for each candidate. Record the wall thickness and how it is measured; overall and interior dimensions; stated timber and wall construction; roof, floor and opening details; any finish or insulation; included components; and preparation or assembly notes. Leave a blank where information is missing instead of treating it as standard. That makes gaps visible and gives you focused questions for the seller. Keep the product page, dimensional drawing, quote, and order summary distinct in your notes, since each may serve a different purpose. Note the source and date of each important detail, especially if a drawing or configuration changes, and ask which document applies if a figure differs between a product page, drawing and quotation.
Compare the building’s useful space, the site work it requires and the complete order scope—not just one prominent specification. Keep the same units and definitions throughout your sheet: 70 mm is 26 mm more than 44 mm, but that difference does not make one model the better match automatically. Options may have different dimensions or included items, so compare those independently. Separate must-haves from extras and ask for written confirmation of details that affect your decision. If the seller cannot confirm an important point, leave it unresolved rather than filling the gap with an assumption.
Decide whether 70 mm fits your priorities
A 70 mm wooden garden house is a stronger candidate when its documented construction addresses a priority you can name, its overall specification suits the way you will use it, its interior space works and the site requirements are manageable. It is less persuasive when the wall figure is the only clear detail, when another option already meets your needs, or when information needed to judge the building is missing. Consider the usable floor area as well as the wall dimension, especially if your planned footprint is fixed. Thickness should help narrow the field, not make the choice by itself.
Before deciding, answer four questions: What exactly does 70 mm measure? What will the building need to do, and in which seasons? Which roof, floor, openings and site details support that use? What arrives with the order, and what must you arrange separately? If the answers fit together, compare the remaining options on equal terms. If they do not, pause for clarification or revise the shortlist. This keeps the purchase tied to how you will use and prepare the garden house, rather than to a single number on a product page.
Frequently asked questions
Does a 70 mm wall make a garden house suitable for year-round use?
Not by itself. Wall thickness is not an insulation rating or a promise of year-round comfort. Check the roof, floor, openings, seals and any insulation, as well as the manufacturer’s stated intended use and your site conditions.
Is a 70 mm wooden garden house necessarily stronger?
The dimension alone does not establish structural strength or suitability for particular site conditions. Ask for the manufacturer’s construction details and any relevant suitability information. If exposure or loads are a concern, get advice from the manufacturer or a qualified building professional.
How much thicker is 70 mm than 44 mm?
The nominal difference is 26 mm. That comparison is useful only when both figures describe wall thickness in the same way. It does not show which building is the better fit, or establish differences in insulation, durability or overall performance.
What should I compare besides wall thickness?
Compare internal and external dimensions, wall construction, roof and floor details, doors and windows, included components, site-preparation instructions, assembly requirements and delivery terms. Check the exact configuration you plan to order, rather than relying on a product name or image.
What should I confirm before ordering a 70 mm garden house?
Confirm what the 70 mm measurement covers, what is included in the order, and what the manufacturer requires for the base and site. Also check access, delivery and assembly arrangements. Ask for written clarification if a detail affects your choice but is missing.
A thicker wall can be a meaningful preference, but only the full specification can show whether a particular garden house fits your plans. Confirm what the 70 mm figure measures, compare the components and dimensions that affect your use, and include site preparation and delivery in the decision. That way, your choice rests on a building you can assess as a whole—not on wall thickness alone.
