Buying a 70 mm Wooden Garden Shed: When to Consider Thicker Walls
Garden shed buying guide
Buying a 70 mm wooden garden shed is not simply a matter of choosing the biggest wall measurement. The figure can help you compare construction, but it cannot tell you how durable the whole building is, how much room you will have inside or whether the design suits your site. Before ordering, weigh it against the shed's intended use, its full specification and the space you can give it.
Does a 70 mm wall suit the way you'll use the shed?
Start by describing what the shed has to do. Occasional storage, frequent access to tools, a hobby area and a space used for several hours at a time make different demands on access and usable floor area. For storage, doorway clearance and shelf positions may matter more than a thicker wall. If you expect regular use, you may give more weight to the construction, but do not treat the thickness figure as proof that the whole shed will last longer or cope better with weather. Those questions depend on the complete design, the site, installation and care. Note the largest items you plan to store and how you will move them in and out. Also consider whether their use changes through the year: a mower, bicycles or seasonal furniture may need a clear route at different times, while a work surface needs enough uncluttered space around it.
List your must-haves before reading model pages: a maximum footprint, the largest item to store, how often you will retrieve it, and preferences such as windows or shelving. Keep possible future uses realistic; paying for a build you do not need can use up budget and garden space without solving a current problem. A page for Verdana 1 garden house can be assessed against this list, but rely on its stated model details rather than its name or a photograph. Record missing dimensions as questions, not assumptions, and apply the same criteria to every candidate.
What does the 70 mm measurement tell you?
Treat 70 mm as a measurement that needs a clear definition. It may describe the stated thickness of the wall timber or a particular wall profile; the product documentation should explain what is measured and where. The figure cannot tell you the grade or condition of the timber, how the joints are made, or what treatment is used. Nor does it show whether every wall section and the areas around openings have the same construction. Read the technical description closely: similar-looking labels do not necessarily mean two products measure the same part in the same way.
For a model such as Verdana 2 garden house, look for a model-specific explanation rather than carrying a figure over from another shed. If the wording leaves it open, ask whether the measurement is nominal or finished, whether it applies throughout and whether the construction changes around openings. Keep the answer with the model details so you can compare like with like. A written clarification is easier to refer back to than a general reassurance, particularly if you are weighing a 70 mm option against a thinner-wall design. Check the date of any clarification as well, since current product information should take precedence over an older description or a note copied from a previous comparison.
Check the internal dimensions as well as the footprint
Outside dimensions and usable room inside are not interchangeable. If two sheds have the same external footprint and a comparable layout, thicker walls can take up more of the space around the perimeter, so their internal areas may differ. The exact effect depends on the design, so do not calculate it from the wall number alone. Compare published internal and external measurements, where both are available, and check what points they refer to. If only outside dimensions are provided, ask how much clear floor area remains once the walls are in place. It is also worth checking whether measurements include features such as roof overhangs or projecting steps, because these can affect where the building can be positioned even when they do not add usable interior space.
Measure the space available in your garden and leave room to approach and maintain the shed, rather than checking only whether its footprint fits. Consider headroom near the edges, the entrance and the route for moving bulky items through it, as well as the floor area in the centre. For Durano garden house, use measurements or a plan stated for that model; its appearance does not establish the internal layout. If a floor or base is listed separately, confirm which footprint applies before preparing the site.
Compare the whole construction, not just the walls
Wall thickness is only one line in a complete building specification. Compare the information provided about the roof structure and covering, the floor, corner connections, door and window frames, fittings and any finish. A larger wall measurement cannot make up for other details that are unsuitable for your plans or left unspecified. Check whether a floor, roofing, glazing, fittings or treatment is included in the package or offered separately. A product photograph may show a finished-looking building, but it is not a reliable way to establish which components come with the order. Read any exclusions alongside the main description, as an omitted component can change both the final cost and the amount of preparation required before the shed can be used.
If wind or rain exposure is a concern, wall thickness alone is not evidence of a weather rating or site suitability. Look for guidance on the exact model, including any stated limits or requirements for the roof, joints, openings and fixing. For questions about the site or assembly, ask a competent installer rather than relying on a general description of a garden shed. The Veltor 1 garden house page is a separate model listing: assess only the details given for that item, and do not transfer construction information from another design.
Plan the base, delivery and assembly
Settle the base and assembly arrangements before ordering. Confirm the required base footprint from the model's instructions and compare it with the space available; the 70 mm wall measurement is not a guide to base size. Ground conditions, access and clearance for building can affect preparation, so follow the supplier's model-specific guidance. If the ground or construction details raise technical questions, get appropriate professional advice. Do not guess at the base requirements or assume that guidance for another shed applies to the one you are considering.
Ask how delivery is arranged, what is included in the pack, whether assembly is included and what access is needed to bring the components to the site. Do not assume a 70 mm model is easy or difficult to handle: check model-specific package dimensions, weight and instructions if supplied. Arrange suitable help if the supplier recommends it. Before committing to Orello 1 garden house, seek the assembly and package information for that model rather than relying on instructions for a different design. Check whether you need to make decisions about the base, roof covering or finish before assembly begins, so that work does not pause because a necessary item has not been arranged.
Consider the site and timber care
Think about the shed's position as well as its specification. Check how exposed or sheltered the spot is, whether water tends to collect nearby, how close trees or fences are, and whether you can reach the outside walls for maintenance. Overhanging branches, splashback and restricted access may affect how straightforward it is to look after an outdoor timber building. These observations do not prove that a particular shed is suitable; they help you identify what to ask about in the supplier's guidance for that model and location. Consider the route from the house or gate too, particularly if you will carry tools or equipment to the shed regularly; convenient access can matter more in daily use than a marginal difference in wall thickness.
Ask what finish or preservative is supplied, whether further treatment is required before or after assembly, and what regular care the maker recommends. Follow the model-specific instructions; an image's colour or a general description of timber cannot tell you what finish is included. Airing the shed and avoiding a build-up of water beside the walls are practical considerations when planning the site, but they do not replace guidance about ground clearance or weather protection. For Modano 1 garden house, look for care information that applies to that model and clarify anything not stated.
Check the doors, openings and everyday layout
Assess how you will enter and use the space. Check the clear width and height of the doorway, the threshold, the route a door takes when opened and whether shelving or stored items will obstruct access. If windows matter to you, check their stated position and whether they open; do not infer this from an image. Consider how glazing or openings fit the privacy and light you want in your garden. Use written dimensions or a plan to test the layout against your own requirements rather than relying on the appearance of a product photograph.
Think about routine tasks: can the largest item pass through the entrance, can you reach stored equipment without moving everything, and is there room to open the door fully? These details can make a shed with a suitable wall measurement awkward to use. When reviewing the wooden garden tool shed M listing, compare only the openings and features stated for that specific item. Its name does not establish clearances, shelf positions or the internal arrangement, so check each detail you need before deciding. Sketching the intended positions of bulky items can reveal conflicts between the entrance, a workbench and storage, and makes it easier to decide whether the usable floor area is sufficient.
Compare the full cost and what is included
Set your budget against the complete purchase, not just the wall measurement or a headline price. Compare the shed, any base preparation, delivery, assembly, items not included in the package and accessories you actually need. Before placing an order, check the current written quote and confirm what it covers. A 70 mm label cannot tell you whether the cost of a particular option is justified; that depends on its full specification and the priorities you have set. Keep the comparison on the same basis, especially if the packages include different components. Make a separate note of costs that are estimates rather than confirmed amounts, so they are not mistaken for included items when you compare your final options.
Consider ongoing care as well as the initial spend. Ask what finish is supplied, what maintenance is expected and whether any parts or fittings are excluded from the quoted package. Do not assume a thicker wall means fewer repairs or a longer useful life; timber specification, exposure, construction details and upkeep all matter. Put the answers beside the quote so you can see what differs between models. Review the wooden garden shed S listing on its own terms, and compare the stated inclusions rather than inferring them from a short model name.
Make a like-for-like comparison
A simple comparison sheet can stop one headline figure deciding the purchase. For each candidate, record the exact wall measurement and its definition, outside footprint, internal area, entrance dimensions, roof and floor details, included items, care instructions and assembly information. Mark each point as confirmed, unclear or not provided. That makes gaps visible and gives you focused questions to ask, instead of turning missing information into an assumption. Keep the relevant product page or written response with your notes so you can refer to the same details before ordering. Add the date on which you checked each page or received each answer, particularly when you are comparing models over several days and may otherwise mix current and earlier information.
Compare models against the same intended use and size requirements. A wall measurement should not be weighed against a different footprint or a package with different components without taking those differences into account. Separate firm requirements, such as a maximum footprint or minimum clear entrance, from preferences such as appearance or a larger wall section. If you receive a clarification, record the model it applies to. This is useful when several listings use similar wording or photographs, as details for one shed should not be treated as details for another.
When is a 70 mm option worth considering?
A 70 mm wooden garden shed is worth considering when the measurement is clearly defined, the rest of the specification meets your priorities and the complete building fits your available space and installation plans. You may decide the wall build deserves extra weight if the shed will be in regular use, but still compare the roof, floor, openings and care requirements. If exposure is a concern, rely on information for the exact model and advice from a competent installer about your site, rather than drawing a conclusion from the wall dimension alone.
Choose a thinner-wall alternative if it meets your actual needs and constraints; choose 70 mm when the documented differences matter enough to justify any trade-offs. Before ordering, make sure the dimensions, inclusions, assembly arrangements, care requirements and quoted price are clear. If an important point remains uncertain, especially about the base or site suitability, resolve that model-specific question first. The best choice is the shed whose stated construction and layout fit your garden and routine, not simply the one with the largest number. A final review of your comparison notes can confirm that the preferred option meets the requirements you identified at the outset, rather than only looking more substantial on a page.
Frequently asked questions
Does a 70 mm wall automatically make a garden shed stronger?
No. Wall thickness is one part of the construction, not a strength rating for the complete shed. Timber specification, joints, roof, openings, base and installation all matter. Compare the model's full technical details rather than treating a larger number as proof of overall strength.
Does 70 mm mean the shed is insulated?
No. A stated timber wall thickness is not, by itself, an insulation specification or a guarantee of warmth. If thermal performance matters, ask for details about the complete wall, roof, floor, doors and windows, and look for information that applies to the exact model.
Will thicker walls reduce the usable space inside?
They can do so when you compare sheds with the same outside footprint and a similar layout, because more of that footprint is taken up at the perimeter. The actual internal dimensions depend on the design, so check published inside and outside measurements rather than estimating from wall thickness.
Can I choose a 70 mm shed for an exposed garden?
The wall measurement alone cannot establish whether a shed suits a particular site. Check the manufacturer's guidance for the exact model and the intended exposure, and get advice from a competent installer if the site or assembly raises technical questions.
Do I need 70 mm walls for ordinary garden storage?
Not necessarily. For storage, the footprint, clear doorway, internal layout and care requirements may be more important. Choose a thicker-wall option if its documented construction is valuable for your plans, but do not pay extra on the assumption that the measurement guarantees better performance.
Wall thickness is useful when it is clearly defined and relevant to the way you will use the shed, but it is only one part of the purchase. Compare the full specification, available space, access, site requirements and ongoing care before settling on 70 mm. If those details fit your needs, the figure has earned its place in the decision; if not, another build may be the better match.
