Two-Sash Inward-Opening Window

Two sashes, made to suit your dimensions

Two-sash inward-opening window

Configure a two-sash inward-opening window in pine or oak, optionally aluminium-clad, with your choice of glazing, colour, handle and design pattern.

Opening style

Two inward-opening sashes with tilt function

Material

Pine or oak, each also available with aluminium cladding

Glazing

2- or 3-pane insulating glass

Commercial warranty

5 years

01

Inward-opening sashes and tilt function in daily use

The product construction defines its operation: two window sashes open inwards and a tilt function is included. These provide two ways to use the window; an outward-opening option is not part of this product. Fully opening the sashes needs room inside, whereas the tilt position holds each sash at its intended angle. Select the position that suits the situation at hand.

The interior operating zone is the main planning consideration. Check whether sills, taps, furniture, curtains, lights or other fittings could project into the intended opening area. Consider not only fully opened sashes, but also comfortable day-to-day operation. Where a worktop or furniture sits in front of the window, the handle should remain accessible and the chosen sash position usable. This coordination is especially worthwhile for a made-to-measure window, because the dimensions and actual room conditions can be assessed together. Frequently used circulation and work areas directly in front of the window can therefore be included early in the design.

A two-sash arrangement is also a deliberate design decision. Two sashes divide the window area differently from one sash or an entirely fixed-glazed solution. Consider operation and appearance together: where two opening sashes are needed, this product type may suit the project. If opening is unnecessary or another opening direction is required, compare the window types intended for those purposes.

02

Timber options, aluminium cladding and frame construction

Four material versions are available: pine, pine with aluminium cladding, oak, and oak with aluminium cladding. First select pine or oak, then decide whether to add aluminium cladding to that timber. The choice affects the visible material character and the dimensions of each frame component. Coordinate material with colour, glazing and the selected design pattern rather than choosing it in isolation.

The stated outer-frame dimension is 82 × 78 mm, or 82 × 88 mm with aluminium cladding. The sash frame is likewise 82 × 78 mm, or 82 × 88 mm when aluminium-clad. Record whether you require all timber or aluminium cladding so the applicable frame dimension is used in planning. Outer and sash frames are separate components, even though their stated dimensions are the same for this window. Keep the individual order dimensions distinct from these frame details. That makes the material version, component and relevant dimension clear in your enquiry.

Further specified equipment includes Roto Frank hardware and mounting holes with a diameter of 14 mm. The window carries CE marking. These are fixed product details, while dimensions, material, colour, handle and glazing version are selected from the available options for your project. Our windows and doors come with a five-year commercial warranty. This does not limit any rights under Australian Consumer Law. This gives you a clearly defined basis for configuration without mixing specifications from different window types.

05

Made-to-measure production and forward project planning

Because this window is available made to measure, unambiguous project dimensions form the basis for selection. Allocate width and height clearly and identify every element separately when several windows are required. Allow for the installation position, adjoining building elements and space available for the inward-opening sashes. The stated outer-frame and sash-frame dimensions do not replace your individual order dimensions; they serve different purposes. Alongside the required window dimensions, note the preferred material version and any aluminium cladding. A clear schedule helps bring dimensions, frame construction and design pattern together for every planned window.

Allow for inward opening early in the process. The clearance needed depends on the window dimensions chosen and the immediate setting. A sill, vanity, work surface or other internal fitting may affect operation if positioned close by. Also check curtains, blinds, plants and movable furniture around the window. Consider both full opening and the tilt position. This helps align the intended use with the room layout and identify dimensions and an arrangement that appear suitable before you send an enquiry.

For patterns containing fixed glazing, name the desired layout together with the overall dimensions. Use the specific pattern description rather than simply saying “multi-part” or “with glazing bars”. This makes clear whether you mean two opening sashes only, a combination with one fixed-glazed section, the expressly central option, or two fixed-glazed sections. Clear identification reduces follow-up questions and assists coordination of the made-to-measure version.

06

Coordinate colour, handle and design

Colour and handle are both available choices. They shape how the window is perceived and should be selected with pine or oak and any aluminium cladding in mind. Review the planned window from indoors and outdoors within its design setting. Existing windows, doors, hardware, wall finishes and recurring colours can guide the decision. The chosen glazing-bar pattern also affects how prominent the colour and frame appear overall. Record your preferred colour and handle alongside material, glazing and pattern. Where several windows are planned, identify which choices apply to each element.

The glazing-bar pattern also changes the overall impression. Two bar-free sashes create a different division from versions with one or two horizontal bars. Combinations with fixed glazing can add vertical bars, depending on the named pattern. Include not only colour but also the number and direction of bars described by the pattern in visual planning. Do not infer exact geometry or proportions from a pattern name.

A practical order for selecting options is to establish the required functional arrangement, choose the corresponding design pattern, then determine material, aluminium cladding, colour and handle. Finally, assign the glazing version. This is not a technical requirement, but it can organise independent decisions clearly and avoid contradictions in an enquiry. The result considers both operation and the appearance you want.

07

Relevant alternatives from our window and door range

This two-sash inward-opening window is an appropriate starting point where two opening sashes and a tilt function are required. If no opening is needed, compare it with a fixed-glazed window. A fixed-glazed round window and a fixed-glazed semicircular window are also available for distinctive shapes; neither can be opened. A combination window may suit a project requiring another mix of window elements. Each product type has its own defined specifications.

Where opening direction matters, distinguish inward- and outward-opening products carefully. The outward-opening EI30 fire-rated pivot window has the stated EI30 classification and is described as outward-opening. The outward-opening Super Low Uw passive house window is an outward-opening pivot sash. These alternatives differ fundamentally from the two-sash operation presented here, so their material, glazing and frame details must not be transferred to this window.

For glazed access rather than a window, compare the single-sash outward-opening patio door or the single-sash outward-opening patio door in historic style. Here too, outward opening is a key difference. First decide whether you need a window or patio door, then compare opening direction, sash number, material options and design patterns within the relevant product information. This keeps the selection practical and suited to the intended use.

EI30 fire-rated pivot window, outward-opening, Super Low Uw passive house window, outward-opening, Combination window, Fixed-glazed window, Fixed-glazed round window, Fixed-glazed semicircular window, Single-sash outward-opening patio door, Single-sash outward-opening historic-style patio door.

08

Send a clear enquiry for your preferred configuration

For a focused enquiry, provide the required dimensions, preferred material version and your choice of two- or three-pane glazing. Add colour, handle and the exact name of the design pattern. If fixed glazing is part of the selection, state the complete pattern, particularly where you mean centrally positioned fixed glazing or two fixed-glazed sections. For several windows, clearly label every element with its corresponding dimensions and equipment preferences. Also indicate whether pine or oak is required and whether aluminium cladding is wanted. Each configuration can then be distinguished clearly from the other available arrangements.

Please also tell us which decisions remain open. We can help you work through the offered choices and bring made-to-measure dimensions, timber species, aluminium cladding, insulating glass, colour, handle and pattern together sensibly. A well-prepared enquiry need not settle every detail; it should chiefly show how the window will be used and the design direction you prefer. We can then discuss the next product steps with you.

Is the two-sash window available made to measure?

Yes. The window is manufactured to your dimensions. To ensure it suits your project, provide the required measurements clearly with the preferred version. Also allow for the fact that both sashes open inwards when planning.

Which materials are available?

Choose pine, pine with aluminium cladding, oak, or oak with aluminium cladding. This gives you two timber species and a clad version of each.

Which glazing can I choose?

The window is available with 2- or 3-pane insulating glass. Both include a heat-reflective coating, a CHR warm-edge spacer and argon gas. The glazing seals are silicone.

How does the window open?

This is a two-sash window that opens inwards and includes a tilt function. Allow sufficient clear space on the room side for the intended operation.

Are glazing-bar versions available?

Yes. Patterns without glazing bars are available, as are versions with horizontal bars and, in certain fixed-glazing combinations, vertical bars. The patterns differ according to the arrangement of sashes and fixed-glazed areas.

Can the window include fixed glazing?

Yes. In addition to two-sash-only patterns, several layouts combine two sashes with one or two fixed-glazed areas. One version has centrally positioned fixed glazing. Name the full design pattern in your enquiry so sashes, fixed glazing and bars can be allocated clearly.

Can I select the colour and handle?

Yes. Colour and handle are supported choices. Coordinate both with the selected timber species, any aluminium cladding and the preferred design pattern.

Which warranty applies to the window?

Our windows and doors come with a five-year commercial warranty. This does not limit any rights under Australian Consumer Law. Keep the documents relevant to your order and selected version in a safe place.

Plan your two-sash window with us

Planning a two-sash inward-opening window for your project? Send your required dimensions and details of material, colour, glazing, handle and preferred design pattern. We can help coordinate the available choices and select an appropriate version for your project.