Aluminum Greenhouses with Storage

A greenhouse and separate storage compartment within one aluminum structure

This Bloomcabin aluminum greenhouse with integrated storage pairs a bright growing area with a permanently built-in, separate storage compartment. Keep plants, pots, tools and watering supplies under one roof without filling the growing space or walkways with stored items. It is a practical choice for gardeners who want a greenhouse without adding a separate garden shed.

Choose from many versions for small and larger gardens. Glazing in the growing area varies by model. Tinted panels in the storage compartment make tools, pots and supplies less visible, while both zones remain functionally separate within one cohesive structure.

Total floor area is only part of the decision. Consider the room needed for beds, containers and walkways, then decide how much space your existing equipment requires. A simple plan showing key garden tools and planned crops can make the choice easier. Explore more Bloomcabin greenhouse models.

Shorter trips simplify routine work from sowing to tidying up

The benefit is clear when a task calls for several items in succession. Take soil, pots, labels and tools from storage, use them at the workbench, then return them when finished. The growing area stays clear while useful supplies remain close at hand.

Dimensions, glazing and standard equipment at a glance

Available sizes: 22 versions from 3.77 to 28.08 m².

Models with 2.35 m width: Ridge height approx. 2.32 m; door height approx. 1.65 m.

Models with 3.10 m width: Ridge height approx. 2.67 m; door height approx. 1.85 m.

Frame: High-quality aluminum profiles.

Glazing in the growing area: Polycarbonate or 4 mm toughened safety glass.

Panels in the storage compartment: Tinted glazing.

Doors: 3.10 m-wide versions have a single or double sliding door, depending on the model.

Equipment: Roof vents, integrated gutters and an integrated aluminum base frame. The structure is designed for a wind speed of 30 m/s and a snow load of 210 kg/m².

Further details depend on the selected version.

Take out supplies, tend plants and put used tools away straight away

Sowing, potting and seasonal changeovers often require many materials at once. Sort labels, pots, ties and hand tools by purpose. Keeping a small selection of frequent-use items nearby is more useful than maintaining a permanently crowded work surface.

An uncluttered floor makes it easier to move between plants, shelving and watering equipment. Keep hoses, boxes and bags out of walkways. Establish one continuous main path first, then position benches, containers and shelving so the door remains accessible even when moving larger pots.

Roof vents support air exchange in the growing area. Tall plants, shelving and trellises must not obstruct their operation. In the storage compartment, hooks can hold light tools, narrow shelves can organize small items and low-level areas can be reserved for heavy, stable containers.

When the storage compartment can sensibly replace an additional shed

The adjacent storage area is particularly useful for equipment used mainly with the greenhouse, including plant supports, hand tools, empty containers and watering accessories. Lawn mowers, bicycles and large outdoor furniture need different door widths, turning room and floor space, so plan for them separately.

Take inventory before purchase: which items will actually be used in the greenhouse, how large are they, and will they be stored upright, flat or on shelves? The answers show whether the integrated compartment is sufficient and how much of it should be reserved.

Allow some extra room for items used together only at certain times. Seedling pots, plant supports and empty containers still take up space outside their active season, so storage should not be sized solely around everyday needs.

Prepare sowing and potting supplies in good time

As your local growing season approaches, seed trays, nursery pots, labels and hand tools are often needed together. Inspect them before first use and sort them by task. Remove empty or damaged packaging so you can see what is on hand and spot missing supplies early.

Keep pots and tools awaiting cleaning apart from prepared materials. A designated place for used items helps prevent soil from reaching seeds, labels or clean propagation containers. Clear this area after each task to keep the route to the growing section open.

Keep seeds and other sensitive products in the compartment only if you can meet the manufacturer’s directions for temperature, humidity and storage. Separation from the watered growing area is useful, but it does not by itself create suitable storage conditions. Closable, clearly labelled containers help prevent small items from spilling or being mixed up.

Keep roof vents clear and address heat build-up early

Strong sun can raise temperatures considerably in the growing area. Use the roof vents as needed and check temperature and humidity regularly. Plants and trellises must not block the opening area. As weather, planting and use vary, ongoing observation is more useful than a fixed venting schedule.

Train shoots and place supports with adequate clearance from moving windows and controls. During the season, check that fresh growth has not reached the opening area. Before the season begins, make sure vents move freely and remove dirt and plant debris.

Products that cannot tolerate high temperatures or major temperature swings do not belong in the storage compartment. Always follow the instructions on the individual package. Materials with special storage requirements need a location that meets them.

Use the gutters and manage water around the base and entrances

Integrated gutters collect water from the roof and can be connected to suitable drainage or an appropriate storage tank. Containers must stand securely and must not restrict doors, maintenance routes or access to the storage compartment.

If you collect rainwater for watering, make the collection point easy to reach without steps, tight turns or long carrying distances. The container needs a load-bearing base. Clear leaves and debris from connections and gutters regularly so water can drain in a controlled way.

Direct overflow away from the base frame, foundation and doorways. Standing water makes the greenhouse harder to use, carries dirt into both areas and softens surrounding ground. Decide where excess water will go while preparing the site.

Allocate shelves, hooks and floor space by weight and frequency of use

Narrow shelves keep hand tools, twine, labels and small spare parts off the floor. Place them so edges do not project into the walkway and doors remain clear. Keep commonly used items at a comfortable reach; light, occasional-use items can go higher up.

Heavy bags and robust containers are best kept close to floor level. Stacks must not tip or press against panels and frames. Do not place fragile pots beneath heavy tools. Thoughtful weight distribution makes the compartment easier to access and clean.

Dedicated areas for potting supplies, watering accessories, plant supports and cleaning equipment prevent the storage compartment from becoming disorganized. Labelled boxes make it clear where each item belongs. Leave enough room to reach rear shelves without moving everything first.

Classic or Storage: more growing room or a separate storage compartment

With the Classic version, the entire footprint is available for plants and working space. That suits gardeners who already have suitable storage or want room for as many beds, containers and benches as possible. Tools and consumables must then be brought in from outside or stored in the growing area.

The Storage version assigns part of the structure to a separate storage compartment. This reduces the continuous growing area, but keeps tools and accessories organized nearby. The key question is whether the remaining growing space accommodates your intended crops, paths and work furniture.

Storage suits gardeners who regularly pot, tie in plants, water or clean on site and need several tools for those jobs. Those with few tools who want to plant every available area may benefit more from one uninterrupted growing zone. A plan showing shelves, beds and paths makes the difference clear before purchase.

Install the integrated aluminum base frame on level, permanently load-bearing ground

The integrated aluminum base frame requires a stable, level support. Unevenness can affect frame alignment, glazing fit and sliding-door operation. Check the intended outline carefully before installation. The base must support the entire structure, not just isolated levelled points.

Small differences in height become more significant across longer versions. Check diagonals, levelness and elevation before fitting frames and panels. Follow the model-specific assembly guide and correct deviations before installing additional components.

Confirm soil conditions, freeze-thaw exposure, drainage and local requirements for the specific site. The right foundation depends on those conditions. Have a qualified local professional assess site-specific snow, wind and foundation needs; the product ratings do not replace that assessment. Also check for underground services, property boundaries and nearby buildings before excavation, anchoring or material delivery begins.

Choose glazing that suits your growing area

Toughened safety glass provides a clear view and the traditional appearance of a glass greenhouse. Plants are easy to observe from outside, though water marks and deposits may also show more quickly. Follow product-specific guidance for installation and cleaning. Avoid abrasive products, hard tools and point loads.

Polycarbonate differs from clear glass in appearance, light effect and handling. The better choice depends on your priorities for looks, use and maintenance. Select glazing when choosing your version. With either material, install panels correctly and check their fixings regularly.

The tinted storage panels serve a different purpose from glazing in the growing area: they reduce visibility of what is inside. Still leave a gap between stored items and the panels. This makes cleaning easier and helps prevent tool edges or unstable stacks from pressing against the glazing.

Coordinate door positions, garden paths and carrying routes

Access to both storage and growing areas should suit the garden routes you actually use. Before selecting a site, consider where tools, plants and growing media will arrive from. Sliding doors also need clear space at the sides. Walls, raised beds and large containers must not interfere with operation.

A bag of growing medium, full watering can or large pot should move through the route without tight turns or contact with glazing. Door opening size matters, but so do the paths immediately before and after it. Steps, loose edges and pronounced changes in level can make carrying unnecessarily difficult.

Include routes to the house, compost area and water supply. The shortest route is not always the most practical if it is slippery when wet or crosses sensitive planted areas. A firm, usable route makes seasonal care easier.

Inspect, clean and store materials completely dry

After the main season, gather plant supports, twine, clips and empty pots, then sort out damaged pieces. Clean and dry useful items completely before returning them to their designated storage place. This prevents dirt and moisture from being trapped for long periods.

Remove dead plant material and loose soil from the growing area so the frame, base and glazing remain accessible. This is also a good time to check fixings and ensure vents and door tracks are free of dirt and obstructions. Do this before added seasonal supplies narrow the storage walkways.

Do not store damp textiles, wet cardboard or dirty containers for extended periods. They make organization harder and can cause odours or stains. Check even rarely used items for residual moisture before placing them in rear shelves or boxes for longer storage.

Store fertilizers and pest-control products safely according to manufacturer instructions

Keep fertilizers, pest-control products and other garden chemicals in their intended containers and store them according to manufacturer instructions. Labels must remain legible. Never transfer these products into food containers, and store them separately from seeds and harvest containers.

Being near the growing area does not replace suitable packaging or required storage conditions. If the compartment cannot meet a product’s temperature, humidity or ventilation needs, store it elsewhere appropriately. Refer to the individual product information for spill-handling instructions.

Sharp tools, chemicals and heavy containers need a secure, stable location out of reach of children and pets. Make sure shelves are steady and that no items can fall out when the door is opened.

Create a compact potting zone without narrowing the main path

A workbench near the storage compartment shortens trips during sowing and potting. Choose its depth and position so doors, vent controls and the walkway remain clear. A wipe-clean surface makes soil easier to remove. Store only dry-safe material under the bench, and do not obstruct access.

Set out only the pots, tools and growing media needed for the task at hand. Return clean tools after use; seal leftovers or dispose of them appropriately. A small container for plant debris keeps cuttings off the work surface and out of storage.

The main path must stay passable while you work. Put boxes and watering cans in a designated side area, never in front of doors. If you often move large containers, test their route while setting up. This reveals poorly positioned bench edges, shelves or plant supports early.

Divide additional floor area into clear functional zones

Longer versions often accommodate more plants, equipment and seasonal supplies. Do not use the extra room indiscriminately for more shelving. A clear sequence from entrance to storage, work area and growing space keeps routes understandable and avoids unnecessary trips through the structure.

More plants often mean additional supports, pots, ties and watering accessories. Account for these quantities in the storage plan without accumulating unnecessary stock. Modular boxes can be reassigned between seasons. Long plant supports need a holder where they cannot tip over or block a door.

Divide long shelves into manageable sections so regularly used items do not disappear behind seasonal supplies. Clear cross-routes also provide access to plants and panels without first moving several items.

Plan every permanent storage location when floor area is limited

Even in a compact version, the storage compartment is valuable if the garden has no other suitable storage space. Every box left there permanently uses noticeable room, however. Prioritize items genuinely needed for greenhouse work; bulky or rarely used equipment is often better stored elsewhere.

Draw beds, benches, containers and the necessary walkway into your plan. Then check how much growing space remains beside the storage compartment. Allow for mature plants and their supports, not only small seedlings. This helps avoid overcrowding in the first fully planted season.

The right size depends on the desired balance between growing and storage space, as well as how you plan to use the greenhouse. Tall crops have different needs from many benches or containers. A little extra room in the walkway is usually more valuable than one narrow additional spot that later blocks access to plants or glazing.

Check inventory regularly and buy only what is needed

For commonly used materials, record what remains in stock and which packages are already open. Remove empty packaging and damaged parts from the inventory immediately. Your list will then show only material that can actually be used.

Review supplies before busy work periods and replenish only what is missing for planned tasks. Clear labels help distinguish similar small parts and opened packages, while a short note about each storage location speeds up searching.

After the season, compare what was used with what remained. Materials that are consistently left over need not be repurchased in the same quantity, while commonly missing small items can be added deliberately. Storage then reflects how the greenhouse is actually used.

Organize access, assembly space and protected temporary storage in advance

Before delivery, confirm that components for your chosen version can be carried to the assembly location. Keep the route clear so frame and glazing parts do not need to pass through tight or densely planted areas. Prepare a clean area where components can be laid out clearly before assembly.

Clear sufficient working room around the planned outline. Shrubs, garden furniture and loose materials must not obstruct assembly or later access to gutters and exterior surfaces. Also decide where packaging will be collected during assembly without blocking paths or doors.

Before work begins, have the model-specific instructions and all related documents ready. Check delivered components against the stated contents before assembling frames and glazing, then build according to the instructions.

Practical questions about choosing and using a Storage greenhouse