Single-Leaf Outward-Opening Patio Door

A clear entrance, tailored to your design

One-leaf patio door opening to the exterior

Specify an outward-moving patio door in pine or oak, with aluminium-clad forms also offered. Its measurements, colour, handle, glazing and catalogue pattern can be chosen for the planned setting.

How it opens

Single-leaf, outward opening

Marking

CE marked

Locking

ASSA 3-point locking

Manufacture

Made to measure

01

Operation and everyday use

The door has one leaf designed to travel outwards. Because this movement affects everyday operation, it should suit the intended purpose and the surrounding building conditions. Actual handling will depend on the specified construction and on the handle selected for the order.

SPILKA supplies the ironmongery, while an ASSA mechanism engages at three separate points. When sending an enquiry, record this locking arrangement alongside the chosen timber option, glass, pattern, finish and handle. Keeping those selections together makes the intended door specification easy to follow and prevents individual details from being assigned incorrectly.

The planning layout must accommodate the leaf as it moves outside. Check that the clear area fits the installation conditions and intended passage through the door. Nearby building elements and frequently occupied exterior zones should also be assessed before confirming the opening direction.

An unbroken pane creates a different impression from glazing arranged with bars or beside an opaque infill. The operating direction remains outward for every listed design. Check after closing that the leaf has settled correctly into the frame and that locking is complete. Unusual resistance during opening or locking should be investigated competently rather than overcome by force.

02

Verified construction and section sizes

The assembly consists of an outward-moving leaf and its matching outer frame. A plain timber frame has a 105 × 57 mm section, while the aluminium-clad version has a 115 × 57 mm section. The leaf section is 76 × 78 mm in both versions. These measurements relate only to the specified components; they are not the complete door’s finished depth, width or height.

Installation information specifies 14 mm holes. That component detail is no substitute for surveying the proposed aperture or designing suitable fixings for its particular construction. The finished external size is determined by the bespoke order. When preparing drawings or speaking with us, distinguish clearly between section sizes for individual parts and the dimensions being ordered for the entire unit.

Choose either pine or oak in an unclad timber form or with aluminium cladding. The range therefore includes all-timber versions and timber-and-aluminium versions. Spell out the complete material choice in the enquiry, allowing it to be associated correctly with the requested finish, glass build and named design.

A five-year commercial guarantee accompanies the CE-marked patio door. The hardware is specified as SPILKA, with ASSA locking at three points. Include those product facts in the project record with the selected construction, dimensions and pattern. Distinct references for individual doors and windows prevent options or measurements being attached to the wrong unit.

05

Assessing the intended opening correctly

Before ordering a bespoke door, identify its intended aperture without ambiguity. Record the building elevation concerned and label which face is indoors and which is outdoors. On renovation work, note every existing part that will remain as well as anything due to be taken away. Consistent references prevent otherwise accurate dimensions from being interpreted from different starting points.

The leaf sweeps across exterior space, so reserve that zone in the plan. Inspect adjacent walls, parapets, railings, steps, projections and any furniture or planters, including objects left there only occasionally. Paths and outdoor sitting or circulation areas also matter. Exact clearance is governed by the dimensions ordered for this particular door and by the physical layout of the installation site.

Make a traceable record of the aperture, taking every dimension from consistently labelled points. Unreferenced figures are easily misread. A basic drawing can mark indoor and outdoor faces, locate the opening and identify adjoining construction, thereby adding useful clarity to the written details. Photos can explain site context, but a competent survey is still required.

Include floor build-ups and completed surface levels when planning the work. Where today’s site differs from the intended finished state, explain the change in the submitted details. Do the same for linings, cladding or junction work due later. Frame and leaf section figures describe components only; they cannot serve as the final ordering dimensions for the complete door assembly.

A competent professional can verify dimensions and construction conditions if you want added assurance before ordering. Such input is especially valuable while floor layers, linings or junctions remain liable to change. Clearly separating the structural aperture, the proposed finished surfaces and the specified door unit gives everyone an unambiguous starting point for the next stage of discussion.

06

Coordinating appearance, materials and colour

The finished appearance follows from several connected decisions. Begin with the construction: both pine and oak are available either as plain timber or clad in aluminium. Use the full description of the selected version, since asking only for “wood” or “aluminium” does not identify which offered build is required.

The selected colour can either sit quietly among existing façade and interior finishes or deliberately distinguish the patio entrance in a new project. Review it against neighbouring windows, roofing details and other doors. Specify the colour clearly, taking account of whether the construction is plain timber or aluminium clad.

Treat the handle as part of the complete visual scheme rather than an isolated fitting. State the design direction required and its intended relationship with nearby features and door colour. Add it to the enquiry alongside material build, glazing, finish and catalogue layout.

How the glass is arranged strongly influences the composition. Omitting bars produces one quiet expanse, while cross-bars introduce a firmer horizontal rhythm. Upright glass, mixed crosswise and upright bars, and opaque infills create further points of emphasis. Rather than judging a pattern alone, compare its exact drawing with the established lines of windows and other adjoining features.

For a harmonious result, consider your choices in a fixed order: material version, colour, glass build-up, design and handle. Not every element needs to make a separate statement. You can coordinate individual elements deliberately or choose one clear focal point. Then record the selected combination in full, so all design decisions can be assessed together.

07

Alternatives for other door and window concepts

Projects do not all call for a single door leaf opening outside. Bloomcabin supplies alternative doors and windows for differing opening sizes, patterns of use and architectural aims. Assess each option by its movement, quantity of leaves or fixed parts, clearance requirement and division of glass before selecting a type.

Where two leaves are preferred, an outward-opening double patio door is available. A separate double-leaf version with a traditional character may suit historically influenced architecture. Both families are made to measure and offer several glazing-bar arrangements, including designs with panels. Confirm the precise leaf layout from the selected version and check it against the intended opening.

You may instead consider an exterior door opening outwards, with glazing, bars and door panels available according to its pattern. A sliding door provides a separate option when sideways movement is preferred. The illustrated outward-opening folding doors contain either three or five leaves and fold towards the right. Review each operating method early against the surrounding clearance and planned use of the entrance.

For additional non-opening glass beside a door, consider the made-to-measure single sidelight. This fixed element can be left visually undivided, arranged with alternative bars, or formed from glazing and an opaque panel. Its measurements and location should be developed with the complete opening design.

Where an aperture is to contain glass only and needs no opening action, specify a fixed window. Rectangular units are joined by fixed circular windows as a distinct shape choice. Both forms use insulating glass in double- or triple-glazed specifications and remain permanently closed. Review shape, timber or clad material and bar arrangement against the scheme’s other joinery. Exact catalogue labels for the related ranges follow: Patio door, two leaves, opening outwards, Heritage-pattern patio door, two leaves, opening outwards, Exterior door opening outwards, Sliding doors, Folding doors opening outwards, Glazed door sidelight, single section, Fixed-light windows, Fixed round windows.

08

Preparing your enquiry step by step

Clearly label the project, building location and proposed doorway before listing specifications. Multiple windows or doors should each receive their own unit reference in the supporting documents. This allows subsequent discussion to remain attached to the right element and prevents information from separate openings being confused.

After identification, submit the checked order size or the measurements required to derive it. A supporting sketch should distinguish interior from exterior and show adjacent elements plus finished surfaces. Flag later work to floors, wall coverings and junctions. The stated component sections cannot replace the overall size being ordered.

Then identify the construction precisely: plain pine, pine clad in aluminium, plain oak, or oak clad in aluminium. Add the requested colour and handle. General instructions such as “to suit the house” are not specific enough for an unambiguous configuration, so describe the preferred visual direction as clearly as possible.

Choose the glazing specification and pattern next, recording them as separate decisions. One describes the technical make-up of the glass; the other describes its visible arrangement. Quote the pattern’s catalogue wording, particularly where genuine dividing bars, upright glazing, an opaque panel or infill forms part of the composition.

Gather every decision into one brief: unit identifier, size, construction, colour, handle, glazing choice and catalogue pattern. Check the sketch against the written information so both describe the same configuration, then note outstanding queries in their own section. Clear organisation helps us understand and discuss the bespoke patio-door request.

Is the patio door available made to measure?

Yes. Each door can be produced to ordered dimensions. Send the size of the intended aperture and describe the installation conditions around it. Before ordering, arrange checks of both the site measurements and the relevant construction details.

What timber and cladding options are offered?

Select pine or oak, either as exposed timber or in an aluminium-clad construction. Consider the complete material choice alongside finish, glass specification and design when assessing how the door will look.

May I choose my patio door’s colour?

Yes. Several colour options are offered. Relate your selection to the specified material, elevation, neighbouring joinery and indoor finishes, then give us the exact colour reference in the enquiry.

May I choose the handle?

Yes. Consider visual preference and normal use when selecting the handle. Record it in the same enquiry as the chosen build, colour, glazing and pattern so every element of the configuration remains connected.

May glazing be combined with an infill?

Yes. Depending on the selected pattern, glazing can be combined with an opaque panel or infill. Other choices include one uninterrupted glazed area and layouts divided by upright or horizontal bars. Use the complete catalogue name for the required pattern when making the enquiry.

Does the door have multi-point locking?

Yes. The patio door has ASSA 3-point locking and SPILKA hardware. The locking system secures the door at three points. Within the available options, material, handle, colour, glazing and design can be coordinated.

Which colour are the glass seals?

Black rubber forms the glass seals. When reviewing the design, take this fixed dark detail into account alongside wood species, possible aluminium cladding, selected finish, bar pattern and any opaque infill.

How long is the guarantee valid?

The commercial guarantee period for this door is five years. Retain the paperwork issued with your order, as it links the applicable terms to the exact configuration purchased.

Discuss your bespoke patio-door requirements

Develop the outward-opening, one-leaf door specification for your particular scheme. Gather verified aperture measurements, then identify the material build, finish, handle, glass construction and catalogue layout. Include useful site and installation context when enquiring so the complete made-to-measure configuration can be assessed clearly.