Aluminium Greenhouses with Storage

Greenhouse and separate storage space in one aluminium structure

The Bloomcabin aluminium greenhouse with integrated storage combines a bright growing area with a permanently integrated, separate storage compartment. Plants, pots, tools and watering accessories all fit under one roof, without stored items blocking the growing space or paths between plants. This combination suits gardeners who need a greenhouse while avoiding an additional garden shed.

Choose from numerous versions for compact and larger gardens. Depending on the version selected, the growing area has different glazing. Tinted panes in the storage compartment reduce visibility of tools, pots and supplies. Both sections remain functionally separate while forming a visually coordinated structure.

Total floor area is not the only consideration. Think in advance about the space required for beds, containers and walkways, and how much should be reserved for your existing equipment. A simple plan showing key garden tools and intended crops makes the choice easier. Discover more Bloomcabin greenhouse models.

Short distances simplify repeated tasks from sowing to tidying

The benefit is clear when several items are needed in sequence. Soil, pots, labels and tools can be taken directly from storage, used at the worktable and returned afterwards. The growing area stays clear while necessary materials remain close at hand.

Dimensions, glazing and standard equipment at a glance

Available sizes: 22 versions from 3.77 to 28.08 m².

Models with 2.35 m width: Ridge height approx. 2.32 m; door height approx. 1.65 m.

Models with 3.10 m width: Ridge height approx. 2.67 m; door height approx. 1.85 m.

Frame: High-quality aluminium profiles.

Glazing in the growing area: Polycarbonate or 4 mm toughened safety glass.

Panes in the storage compartment: Tinted glazing.

Doors: Depending on the model, 3.10 m wide versions have a single or double sliding door.

Equipment: Roof vents, integrated gutters and an integrated aluminium base frame. The structure is designed for a wind speed of 30 m/s and a snow load of 210 kg/m².

Further details depend on the selected version.

Take out materials, care for plants and store used tools straight away

Sowing, repotting and seasonal changes often require many materials in quick succession. Group labels, pots, tying material and hand tools by purpose. Keeping a small selection of frequently used items within reach is more practical than maintaining an overcrowded work surface.

A clear floor makes it easier to move between plants, shelves and watering areas. Hoses, boxes and bags should therefore not lie in walkways. First establish a continuous main path, then arrange growing tables, containers and shelves. This keeps the door accessible even when moving larger pots.

Roof vents support air exchange in the growing area. Tall plants, shelves or climbing supports must not obstruct their operation. In the storage compartment, hooks can hold light tools, narrow shelves can organise small items, and low-level spaces can be reserved for heavy, stable containers.

When the storage compartment can sensibly replace an extra shed

The adjoining storage space is particularly useful when it mainly holds greenhouse equipment, such as plant supports, hand tools, empty containers and watering accessories. Lawn mowers, bicycles or large garden furniture have different requirements for door width, turning space and storage area, and should be planned separately.

Take stock before buying: which items are actually used in the greenhouse, how large are they, and should they be stored standing, lying down or on shelves? This helps determine whether the integrated compartment is sufficient and how much space should be reserved.

Allow some reserve for items needed together only at certain times. Propagation pots, plant supports and empty containers still take up space when not in use, so storage should not be sized solely around everyday needs.

Prepare materials for sowing and repotting in good time

At the start of the season, seed trays, propagation pots, labels and different hand tools are often needed at once. Check them before first use and sort them by task. Empty or damaged packaging can be removed so available supplies are easy to identify and missing materials are noticed early.

Keep pots and tools that still need cleaning separate from prepared materials. A clearly defined place for used items prevents soil reaching seeds, labels or clean propagation containers. Clear this area after finishing work so the transition to the growing area remains free.

Seeds and other sensitive products should remain in the storage compartment only when their manufacturer instructions for temperature, humidity and storage can be met. Separation from the watered growing area is helpful, but does not itself guarantee suitable storage conditions. Sealable, clearly labelled containers protect small parts from spills and mix-ups.

Keep roof vents clear and counter heat build-up early

Strong sunshine can significantly warm the growing area. Use the roof vents as needed and check temperature and humidity regularly. Plants and climbing supports must not block the opening area. As conditions depend on weather, planting and use, ongoing checks are more useful than a fixed ventilation schedule.

Guide shoots and supports with sufficient clearance from moving windows and operating components. During the season, check whether new growth reaches the opening area. Before the season starts, vents should move freely; remove dirt and plant debris.

Products that cannot tolerate high temperatures or strong temperature changes do not belong in the storage compartment. Always follow the instructions on the relevant packaging. Materials with particular storage requirements need a suitable alternative location.

Use gutters and keep the base and door area dry

The integrated gutters collect water from the roof and can be connected to suitable drainage or a designated water store. Containers must stand securely and must not restrict doors, maintenance routes or access to the storage compartment.

If you use rainwater for watering, the collection point should be reachable without steps, tight turns or long carrying distances. The container needs a load-bearing base. Regularly remove leaves and deposits from connections and gutters so water can drain in a controlled way.

Overflowing water should be directed away from the base frame, foundation and door entrances. Persistent puddles make use difficult, bring dirt into both sections and soften surrounding ground. Decide where excess water can run off during site preparation.

Allocate shelves, hooks and floor areas by weight and frequency of use

Narrow shelves keep hand tools, string, labels and small spare parts off the floor. Position them so edges do not project into walkways and doors remain clear. Frequently needed items should be at a comfortable reaching height; light, rarely used materials can go higher up.

Heavy bags and robust containers are best placed at floor level. Stacks must neither tip nor press against glazing and frames. Fragile pots should not sit beneath heavy tools. Sensible weight distribution makes the compartment easier to access and clean.

Dedicated areas for repotting materials, watering accessories, plant supports and cleaning equipment prevent storage from becoming cluttered. Labelled boxes show immediately where each item belongs. Leave enough movement space so rear shelves remain accessible without rearranging items first.

Classic or Storage: more growing space or a dedicated storage compartment

With the Classic version, the full floor area is available for plants and working areas. This is beneficial where suitable storage already exists or where as many beds, containers and growing tables as possible are required. Tools and consumables must then be brought in from outside or stored in the growing area.

The Storage version reserves part of the structure for a separate storage compartment. This reduces the continuous growing area, while keeping tools and accessories organised nearby. The key question is whether the remaining growing space is sufficient for intended crops, paths and work furniture.

Storage particularly suits users who regularly repot, tie in, water or clean on site and need several aids for these tasks. Those with only a few tools who want to plant every available area may benefit more from one uninterrupted growing zone. A plan showing shelves, beds and paths makes the difference clear before buying.

Install the integrated aluminium base frame on a level, permanently load-bearing surface

The integrated aluminium base frame requires a stable, level support. Unevenness can affect frame alignment, glazing fit and sliding-door operation. Check the intended outline carefully before assembly. The surface must support the whole area and must not be levelled only at individual points.

Small height differences have a greater effect across longer versions. Check diagonals, levelness and height before fitting frames and panes. Follow the product-specific assembly instructions and correct deviations before installing further components.

Ground conditions, weather exposure, drainage and local requirements must be assessed for the specific site. The appropriate foundation solution depends on these conditions. Also consider underground services, property boundaries and nearby buildings before excavation, anchoring or material delivery begins.

Choose suitable glazing for the growing area

Toughened safety glass gives a clear view and the classic appearance of a glass greenhouse. Plants can be easily observed from outside, although splash marks and deposits are also more visible. Follow product-specific instructions for assembly and cleaning. Avoid abrasive products, hard tools and point loads.

Polycarbonate differs from clear glass in appearance, light effect and handling. Which option suits you better depends on your priorities for looks, use and care. Select the glazing when choosing the version. With both materials, panels must be correctly installed and fixings checked regularly.

The tinted panes in the storage compartment serve a different purpose from glazing in the growing area: they reduce visibility of the contents. Nevertheless, leave space between stored items and the panes. This makes cleaning easier and prevents tool edges or unstable stacks pressing against glazing.

Coordinate door positions, garden paths and transport routes

Access to storage and growing areas should suit the garden paths actually used. Before selecting the site, consider from which direction tools, plants and substrate will arrive. Side areas must remain clear even with sliding doors. Walls, raised beds or large containers must not impede operation.

A bag of substrate, filled watering can or large pot should be transportable without tight turns or contact with glazing. Not only the door opening matters, but also the routes immediately before and behind it. Steps, loose edges and steep level changes can make carrying unnecessarily difficult.

Include routes to the house, compost area and water connection. The shortest route is not always the most practical if it becomes difficult to walk on when wet or crosses sensitive planting areas. A firm, usable route makes care easier throughout the growing season.

Check, clean and store materials completely dry

Collect plant supports, string, clips and empty pots after the main season, and discard damaged items. Clean useful items and dry them completely before returning them to their fixed storage place. This prevents dirt and moisture being trapped for long periods.

Remove dead plant matter and loose soil from the growing area so frames, base and glazing remain accessible. You can then check fixings and make sure vents and door tracks are free of dirt and obstructions. Ideally complete this work before additional seasonal materials narrow the storage walkways.

Damp textiles, wet cardboard and dirty containers should not be stored permanently. They make the compartment harder to keep organised and can cause odours or stains. Check even rarely used items for residual moisture before putting them on rear shelves or in boxes for longer periods.

Store fertilisers and plant-protection products safely as instructed by manufacturers

Fertilisers, plant-protection products and other garden chemicals must be kept in their intended containers and according to manufacturer instructions. Labels must remain legible. Do not transfer such products into food containers, and store them separately from seeds and harvest containers.

Proximity to the growing area does not replace suitable packaging or required storage conditions. If the compartment does not meet a product’s requirements for temperature, humidity or ventilation, it must be stored elsewhere in a suitable place. Information on handling spills is found in the relevant product information.

Sharp tools, chemicals and heavy containers need a secure, stable place out of reach of children and pets. Also ensure shelves stand firmly and no items can fall out when the door is opened.

Create a compact repotting zone without narrowing the main path

A workbench near the transition to the storage compartment shortens journeys during sowing and repotting. Choose its depth and position so doors, vent controls and the walkway remain free. A wipe-clean surface makes soil easy to remove. Store under the table only materials that can remain dry and do not obstruct access.

Set out only the pots, tools and substrates needed for each task. After use, return clean tools to their places; seal leftovers or dispose of them appropriately. A small container for plant waste keeps cuttings away from the work surface and storage compartment.

The main path must remain passable even while working. Boxes and watering cans therefore belong in a designated side area, not in front of doors. If you often move larger containers, test their route while setting up. This reveals poorly placed table edges, shelves or plant supports early.

Divide additional space into clear functional areas

Longer versions often accommodate more plants, equipment and seasonal supplies. Do not use the additional room indiscriminately for more shelves. A clear sequence of entrance, storage, work area and growing space keeps routes organised and avoids unnecessary trips through the entire structure.

More plants often require extra supports, pots, tying materials and watering accessories. Include these quantities in storage planning without accumulating unnecessary supplies. Modular boxes can be reassigned between seasons. Long plant supports need holders where they neither tip over nor block a door.

Divide long shelves into manageable sections so frequently used items do not disappear behind seasonal materials. Clear crossways also make plants and panes easier to reach without first moving several items.

Plan every permanent position in advance where floor space is limited

Even in a compact version, the storage compartment is valuable when no other suitable storage is available in the garden. Every permanently stored box, however, takes up noticeable space. Focus on items genuinely required for greenhouse work. Bulky or rarely used equipment is often better kept elsewhere.

Draw beds, growing tables, containers and the required walkway on the plan. Then check how much growing area remains beside the storage compartment. Consider mature plants and their supports, not only small young plants. This prevents the greenhouse becoming too cramped in its first fully planted season.

The right size depends on the desired balance between growing and storage areas, as well as how it will be used. Tall crops make different demands from numerous growing tables or containers. A little extra space in the walkway is usually more helpful than one narrow extra position that later obstructs access to plants or panes.

Check supplies regularly and buy only what is needed

Record which regularly used materials remain available and which packs are already open. Remove empty packaging and defective parts from the inventory immediately. The list then shows only materials that can actually be used.

Check stock before labour-intensive periods and add only what is missing for planned tasks. Clear labels help distinguish similar small items and opened packs; a short note of the storage location reduces searching.

After the season, compare which supplies were actually used. Materials regularly left over need not be bought again in the same quantity, while frequently missing small items can be added purposefully. This keeps stock aligned with real greenhouse use.

Organise access, assembly space and protected temporary storage in advance

Before delivery, check whether components for the selected version can be transported to the assembly site. The route should be clear so frame and glazing parts do not have to be carried through narrow or densely planted areas. Also prepare a clean surface where components can be laid out clearly before assembly.

Clear sufficient working space around the intended outline. Shrubs, garden furniture and loose materials should obstruct neither assembly nor later access to gutters and outer surfaces. Plan where packaging can be collected during assembly without blocking paths or doors.

Before starting, have the product-specific instructions and all related documents ready. Compare delivered components with the stated contents before fitting frames and glazing, and assemble the greenhouse according to the instructions.

Practical questions about selecting and using the Storage greenhouse