Single-sash vertical pivot window, outward opening

Made-to-measure outward-opening pivot window

Single-sash outward-opening pivot window with vertical axis

A made-to-measure single-sash pivot window in pine or oak, optionally aluminium-clad. Choose the colour, handle, glazing and one of the named glazing-bar designs for your planned window arrangement.

Opening type

One sash with a vertical pivot axis, opening outwards

Material

Pine or oak, each also available with aluminium cladding

Glazing

Insulating glass with coating, warm edge and argon fill

Design

Colour, handle and glazing-bar options

01

Everyday operation and use

The defining feature of this window is its single sash moving around a vertical pivot axis. Unlike a conventional side-hinged sash, this produces a turning action. The window opens outwards. Its movement should therefore be considered when planning everyday use. This is not a freely configurable opening system; it is a clearly specified window type with one sash and a vertical pivot axis.

The handle is one of the features you can select for your configuration. Consider it both as an operating element and a visible part of the window. The best handle style depends on your preferred internal appearance, material and frame colour. The hardware includes components from SPILKA and IPA; state your handle choice separately in your enquiry.

Calm, controlled operation is sensible in everyday use. Move the sash using the intended handle and avoid pulling it by glazing bars, glass or frame sections. Keep objects out of the movement area and use suitable care products for seals and coated or clad surfaces. Care instructions should always reflect the ordered material finish, as timber surfaces and aluminium cladding may have different surface properties.

Where several people use the window, consistent operation through the intended handle is advisable. Keep the movement area of the outward-opening sash clear and allow for its pivoting movement near external components or objects. This helps the single-sash window with vertical pivot axis remain suited to its planned installation location.

02

Construction and component dimensions at a glance

All numerical product specifications are collected here. The outer frame component measures 105 × 57 mm. With aluminium cladding, the corresponding component dimension is 115 × 57 mm. The sash frame component measures 76 × 65 mm; with aluminium cladding it measures 86 × 65 mm. These figures identify individual frame components. They are not the depth, width and height of the complete window and do not replace order dimensions for your project.

The specified diameter for installation holes is 14 mm. This dimension applies only to the holes and must not be confused with order dimensions or the building opening. For glazing, choose between double and triple insulating glazing. The window is CE marked and comes with a five-year manufacturer guarantee.

Frame material options are pine, pine with aluminium cladding, oak and oak with aluminium cladding. The cladding changes the stated component dimensions of the outer and sash frames. Your enquiry should therefore clearly state whether you require an all-timber version or a version with aluminium cladding. The material decision belongs to the specific product configuration and should be recorded with the order dimensions.

The hardware includes components from SPILKA and IPA; select the handle for your configuration. The glass seals are black rubber. For the desired window appearance, coordinate the material, any aluminium cladding, colour, glazing and glazing-bar design. This considers the visible design features together while hardware and seals retain their respective functions in the window construction.

05

Assessing the intended opening correctly

As the window is made to measure, a reliable enquiry begins with assessing the intended building opening. Do not record only one measurement; check the opening at several points. Variations in existing construction may matter for planning. Order dimensions should be clearly labelled so every figure has an unambiguous reference. Outer- and sash-frame component dimensions must not be used instead of wall-opening dimensions.

Also consider that the sash opens outwards and pivots around a vertical axis. The external movement and clearance area must suit the installation situation. Façade projections, reveals, railings, external shading, plants or other components can affect the usable space. These are project checks, not statements that any setting is generally suitable. The decisive factor is the actual space on site.

Indoors, consider the intended operating position too. The handle should be sensibly reachable in use, and the window arrangement should suit the planned furniture and room use. This does not establish a fixed installation height; it must be determined for the individual project. Where sills, worktops or other components adjoin, include them in your sketch so the window position is clear.

For a new build, drawing dimensions can provide a suitable starting point. In an existing building, careful measurement of actual conditions is advisable. If uncertain, have the installation situation checked by a qualified professional. In your enquiry, clearly state whether figures are opening dimensions, window dimensions or other reference values. A simple labelled sketch can identify the axis position, inside and outside, and adjacent components without guessing technical details.

06

Material, colour and visual composition

Material choice shapes the window’s appearance both in detail and alongside the façade. You can select pine or oak. Both timber types are also available with aluminium cladding. You are therefore choosing more than a material name: you are defining the visual composition of the frame surfaces. State aluminium cladding expressly in your enquiry, as it is a distinct version.

You may also choose the colour. State your preferred shade as clearly as possible in the enquiry and coordinate it with the material, aluminium cladding and glazing-bar pattern. Consider its relationship with the façade, roof, doors and other windows. This allows either a restrained overall appearance or a window used deliberately as a design accent.

The glazing-bar design also influences proportion. Open glass emphasises a continuous surface, whereas horizontal and vertical lines organise the view. With colour and material, the same window can therefore appear calmer or more structured. Select these features as one composition: first the preferred frame effect, then the division of the glass area, followed by a handle that fits the arrangement.

For materials, distinguish between an all-timber version and pine or oak with aluminium cladding. Record this choice explicitly, because clad versions have different outer- and sash-frame component dimensions. Add the desired colour and consider the selection with glazing, glazing-bar pattern and handle. The result is a clearly defined material and colour composition for your window.

When the window is positioned beside other opening elements, recurring lines can support a coherent appearance. Compare glazing-bar heights, frame effect and colour direction project by project; automatic matching with other product types is not guaranteed. Record desired visual relationships in a short description or sketch rather than assuming that similar product names create identical appearances.

07

Placing related window types and doors

The most important comparison point between related windows is the opening method. This model has one outward-opening sash with a vertical pivot axis. The range also includes single- and double-sash inward-opening tilt windows. They suit different operating and room situations, so they should not be selected solely because their frame or glass appearance seems similar.

For projects requiring an EI30 product classification, separate fire-resistant windows are available. These include an inward-opening oak version and an outward-opening fire-resistant pivot window in oak, each with double glazing and a heat-reflective coating. This classification applies only to the products explicitly identified as such, not to the pivot window presented here.

Another alternative is an outward-opening passive-house window with the product designation Super Low Uw. It is made from pine with a special thermal-insulation material and has triple glazing with a heat-reflective coating, warm edge and argon fill. For larger or divided window arrangements, the combination window may also be relevant; its exact configuration is determined for the project.

Where a low-level opening element is planned, related single-sash patio doors can form a suitable comparison group. A regular and a historic-style version are available, both opening outwards. Depending on the chosen design, glazing, glazing bars and a panel are provided. Windows and patio doors remain separate products, with their dimensions, materials and construction selected individually.

Below this section, you will find the related products with their full catalogue names. First compare opening direction, number of sashes and product type. Then check material, glazing and available styling options. This makes it easier to decide whether the single-sash pivot window, inward-opening window, specialist version, combination window or patio door better suits your project. Single-sash inward-opening window, Double-sash inward-opening window, EI30 inward-opening fire-resistant window, EI30 outward-opening fire-resistant pivot window, Super Low Uw outward-opening passive-house window, Combination window, Single-sash outward-opening patio door, Historic-style single-sash outward-opening patio door.

08

Prepare your enquiry in a few steps

Start with a clear product description: single-sash outward-opening pivot window with a vertical axis. Then add reliably measured dimensions and identify what they refer to. A simple sketch showing inside and outside can prevent misunderstandings. If the opening is irregular or the connection detail is complex, describe this briefly and have the measurement checked professionally where needed.

Next, decide on the material. Note pine or oak and state clearly whether you want aluminium cladding. Add your colour preference without relying only on broad terms such as light or dark. If you already have a precise colour designation, use it during consultation. This keeps the desired frame appearance clear from the outset.

Then choose the glazing build-up and copy the full name of the desired glazing-bar design. Exact wording is especially important for glazing-dividing versions. Add your handle choice as a separate item. You do not need to treat the hardware brands as a customer choice, since their mention does not create a choice of brand.

Finally, check whether adjacent windows or doors should be included in the visual planning. Describe desired reference lines or a shared colour direction and summarise your selection clearly: product name, dimension with a clear reference, material, aluminium cladding, colour, double or triple glazing, full glazing-bar design name and handle. Add relevant details of the opening or adjoining components. A well-structured enquiry provides a strong basis for discussing your made-to-measure pivot window.

Is the pivot window available made to measure?

Yes. The window is offered made to measure. For your enquiry, we need clear information about the intended opening. As building situations vary, dimensions should be taken carefully and, where necessary, checked by a qualified professional.

Which materials can I choose?

Choose pine, pine with aluminium cladding, oak or oak with aluminium cladding. The suitable version depends, among other things, on your preferred material effect and the planned design of the building.

Can I choose a colour for the window?

Yes, colour selection is one of the available purchase choices. Coordinate the desired shade with the material and any aluminium cladding, as these features together determine the overall visual impression of the window.

Is there a choice of handles?

Yes. Alongside dimensions, colour and other specification features, you can choose a handle. State your preferred handle in the enquiry so it can be included as a separate part of your required product configuration.

What glazing is available for the pivot window?

You can choose between double and triple insulating glazing. Both glazing options include a heat-reflective coating, CHR warm edge and argon fill. State the required version with the dimensions, material and glazing-bar design in your enquiry.

Is the window CE marked?

The window is CE marked. This marking is among the confirmed product features. If you need particular documents or information for your building project, please identify them clearly in your enquiry so the requirement can be allocated correctly.

How long does the guarantee apply?

The manufacturer guarantee lasts five years. Keep the information supplied with your order and follow the product guidance for use and care. This helps ensure that the version and order can be clearly identified later.

What information should I have ready for an enquiry?

Useful details include the intended opening dimensions, preferred material, decision for or against aluminium cladding, colour, glazing-bar design, glazing and handle. Add any particular features of your installation situation as clearly as possible.

Prepare your window enquiry clearly

Prepare the dimensions of the intended opening, preferred material, desired colour, glazing-bar design, glazing build-up and handle choice. Also tell us whether aluminium cladding is required. This lets us identify your enquiry for the single-sash pivot window clearly and discuss the chosen configuration with you.