Bloomcabin 1 door leaf without decorative bars. Give a sidelight project a crisp, understated finish with one door leaf without decorative bars. This pared-back design focuses on a single, uninterrupted appearance, making it a versatile visual choice for entrance settings that favour simplicity.
Why choose this Bloomcabin design?
This single door leaf has no decorative bars, giving the design a quiet and unfussy character. The uninterrupted appearance creates a neat visual element for a sidelight arrangement with a modern, minimal or understated direction.
Without a decorative-bar pattern to divide the design, the door leaf maintains a simple, cohesive appearance. It provides an uncomplicated starting point when you want the wider sidelight design to feel light, clear and carefully considered.
The single-leaf design can help support an energy-efficient entrance and a comfortable indoor environment throughout the changing seasons.
A fitting option for single-leaf sidelight projects requiring one door leaf without decorative bars. Its straightforward appearance can contribute to a clean entrance composition and provides a versatile basis for coordinating the other elements of the project.
Customer reviews 
Flexible payment options Review the available payment methods when configuring your order.
Configure now Configure this single door leaf without decorative bars for your sidelight project. For help contact our team.
Type: Non-opening sidelight in a fixed frame;
Warranty: 5 years;
CE: Yes;
Material: Pine, pine with aluminium cladding, oak or oak with aluminium cladding;
Glazing: 2- or 3-pane glazing unit with heat-reflective coating, warm-edge spacer (CHR) and argon gas;
Glazing seals: Black rubber;
Mounting holes: 14 mm;
Frame: 105 × 57 mm; with aluminium cladding: 115 × 57 mm;
Single-panel door sidelights
Single-Panel Door Sidelights
Configure a made-to-measure Single-Panel Door Sidelight in pine, oak or an aluminium-clad version, with a choice of glazing, colour and nine listed designs. Every configuration has a five-year warranty and CE marking.
Operation
Non-opening sidelight in a fixed frame
Materials
Pine, oak or aluminium-clad versions
Glazing
2- or 3-pane glazing unit
Sizing
Made-to-measure sizing available
A Single-Panel Door Sidelight brings a fixed glazed element to the side of an entrance while letting you coordinate its material, glazing, colour and pattern with the wider design. This product is non-opening, so its role is different from that of the working door leaf beside it. Made-to-measure sizing helps you choose it for the intended opening rather than relying on a standard size.
Choose pine, oak or an aluminium-clad version of either timber, then select a 2- or 3-pane glazing unit. Nine listed designs range from an option without decorative bars to arrangements with horizontal bars, vertical glazing and panels. The following guide explains each decision clearly, including frame dimensions, visual planning and the information worth preparing before you enquire.
01
This Single-Panel Door Sidelight is a non-opening glazed unit in a fixed frame. It is intended to sit as a companion element to a door, but it is not an additional door leaf and has no everyday opening action. This distinction matters when you plan how the entrance will be used: people pass through the adjoining door, while the sidelight remains in place. You do not need to allow an operating path for the sidelight, although the working door and any other moving elements still need their own suitable space.
A fixed sidelight can be a useful choice when your priority is to add a coordinated glazed panel without introducing another opening section. Consider the way people approach the entrance, where the door handle sits and which side of the door gives the most balanced arrangement. These are layout decisions rather than changes to the sidelight’s operation. The chosen product remains fixed whichever material, glazing unit, colour or decorative design you select.
The fixed operation remains the same across all nine design patterns. Your selection changes the visual arrangement of the sidelight, with choices including an undivided glazed design, horizontal glass-dividing bars, glazing with a panel and vertical glazing combined with decorative bars and a panel. It does not add an opening action. If the element itself needs to provide access, compare an appropriate door format instead of this fixed sidelight.
02
Choose from four material configurations: pine, pine with aluminium cladding, oak or oak with aluminium cladding. Start by deciding whether you want pine or oak, then whether you want the aluminium-clad version of that timber. These are distinct choices rather than a finish description applied automatically to every sidelight. When comparing them, consider the material selected for your adjoining door and other nearby frames so the entrance reads as one considered composition.
The frame dimensions depend on that material configuration. Our pine or oak frame measures 105 × 57 mm. With aluminium cladding, the frame measures 115 × 57 mm. Do not carry the unclad frame dimension across to an aluminium-clad choice. The difference should be included when you consider how the sidelight relates to the available opening, adjoining door frame, internal finishes and surrounding building details. Keep both figures together with the exact material name when discussing your preferred configuration.
The mounting holes are 14 mm. This component specification does not replace an assessment of the surrounding opening or determine how the product should be fitted within a particular structure. Made-to-measure sizing is available, allowing you to select the overall product size for your project rather than rely on a single standard size. Gather the relevant opening information before ordering and make clear what each measurement represents. We can help you select from the available product choices, while any site-specific construction, structural or fitting decisions should be handled by a suitably qualified person responsible for your project.
03
The sidelight is available with a 2-pane or 3-pane glazing unit. Whichever pane count you select, the glazing includes a heat-reflective coating, a warm-edge spacer identified as CHR and argon gas. Black rubber glazing seals complete the listed glazing specification. These common components mean the main glazing decision is between the two available pane counts, followed by the way the glass is divided or combined with a panel in your selected design.
Choose the pane count as part of the complete sidelight configuration rather than considering it in isolation. The frame material, overall made-to-measure size and selected arrangement of glazing, bars and panels all contribute to the finished product. If your project has a defined thermal, acoustic, security or light-transmission requirement, assess the complete proposed configuration against that requirement before confirming your choice. This gives you a more useful basis for comparison than pane count alone.
The black rubber seals are a defined visual detail around the glazing, so take them into account when coordinating colours and decorative bars. Against a dark frame colour they may appear more integrated; against a pale colour they may create a stronger outline. That is visual guidance rather than a change in glazing performance. The amount and arrangement of visible glazing also depend on the chosen design: an option without decorative bars gives a different composition from one with horizontal divisions, vertical glazing or a panel. Select glazing and design together so that the pane count and the appearance form one deliberate choice.
04
The nine available designs fall into four useful groups. The simplest is a single-frame sidelight without decorative glazing bars, which keeps the glazed area visually uninterrupted by a bar pattern. A separate single-frame design combines glazing with a panel. Between these two starting points are four patterns with horizontal glass-dividing bars and three panel designs that combine vertical glazing with decorative bars. All nine are fixed sidelight designs, so your choice determines the appearance rather than the operation.
Four designs use horizontal glass-dividing bars within the single frame. You can choose one, two, three or four horizontal glass-dividing bars. Fewer bars give the glazing a less subdivided appearance, while a higher bar count creates a stronger horizontal rhythm. Compare these lines with the adjoining door, nearby windows and other architectural details, but do not assume that the bars will be equally spaced or that the glazed sections will have particular proportions. The final appearance will also relate to your made-to-measure size.
The remaining three panel designs use vertical glazing with decorative bars. One has two horizontal decorative glazing bars and a panel; another has three horizontal decorative glazing bars and a panel; and the third combines two horizontal decorative glazing bars, one vertical decorative glazing bar and a panel. The distinction between glass-dividing bars and decorative glazing bars is important when identifying your preferred design. Compare the bar direction and count as well as the panel arrangement, then use the complete design description in your enquiry.
05
Begin with the position of the sidelight in the complete entrance. Decide which side of the door it will occupy and identify the boundaries of the space intended for it. An existing opening may have established surfaces and adjoining frames, while planned building work may still allow the arrangement to be adjusted. In either case, distinguish clearly between dimensions taken from the building opening and dimensions proposed for the finished product. They are not interchangeable descriptions.
Measure in more than one place where practical, because an opening that appears regular may not be perfectly uniform. Record the figures rather than reducing them immediately to a single preferred size. Also note which points were measured and whether finishes are already present. This information helps you discuss made-to-measure sizing accurately, but it does not replace project-specific fitting or structural assessment. Allow the person responsible for the work to determine the appropriate fitting tolerances, support and treatment of the surrounding construction.
Look at the sidelight’s position relative to the door, floor level, wall finishes and any adjacent fixed elements. A narrow glazed panel can read as an accent beside the entrance, while a broader one can have greater visual presence; the appropriate proportion depends on the available opening and the door composition. If you are working from drawings, confirm that they show the current intended arrangement. If you are working with an existing opening, use current measurements rather than relying only on old plans. Bloomcabin offers product-choice guidance, so bring clear opening information to your enquiry and arrange any required site assessment or installation planning separately.
06
A well-composed sidelight should relate to the entrance as a whole. First compare its intended width and height with the adjoining door, then look at the lines created by glazing, panels and bars. If the door has strong horizontal features, one of the four horizontal glass-dividing-bar options may provide a related rhythm. If the door includes a panel or narrower vertical glazed areas, one of the three vertical-glazing and panel designs may be a more relevant visual comparison. Matching is a design choice, not a requirement.
Compare each pattern in the context of the whole entrance rather than viewing the sidelight on its own. Look at whether the design’s horizontal or vertical lines complement prominent features in the adjoining door, nearby windows and surrounding façade. A simple scaled drawing can help you judge the balance between the sidelight, door and available opening. Review the pattern at your proposed made-to-measure dimensions, as its visual effect will depend partly on the overall proportions.
Colour choice is available, so choose from the colours offered for your configuration. You might coordinate the sidelight closely with the adjoining door for a unified appearance, or use a considered contrast where that suits the wider scheme. Compare the colour with nearby masonry, cladding, render, internal finishes and visible door furniture in the actual lighting where possible. Remember that material and colour are separate decisions: first choose pine, oak or an aluminium-clad version, then consider the colour available for that configuration. Include the black glazing seals in your visual assessment, particularly if you are deciding between a light, mid-tone or dark frame colour.
07
Choose this Single-Panel Door Sidelight when you want a fixed glazed companion panel beside a door. If the element itself needs to provide access, begin with a door product instead. Single-Leaf Patio Doors – Inward Opening and Single-Leaf Patio Doors – Outward Opening let you start by selecting the required opening direction. Double-Leaf Patio Doors – Inward Opening offer a two-leaf format where that is the more appropriate entrance arrangement. Compare formats first, before considering their individual options.
If your priority is a sliding action, Siegenia Sliding Doors and Patio Life Side-Sliding Patio Doors offer alternative door formats to explore. A sliding format creates a different purchasing decision from a fixed sidelight or a hinged leaf, so consider how you want the opening to function and how you want the glazed areas arranged. Product titles identify the broad format; check the choices listed for the specific product you are considering rather than transferring this sidelight’s materials, dimensions, glazing or designs to another range.
For a non-opening glazed element that is being chosen as a window rather than specifically as a door sidelight, compare the Fixed Window (Non-Opening). The Round Fixed Window (Non-Opening) provides a distinct circular format when the shape itself is central to the design. Internal Panel Doors are relevant when your project concerns an internal doorway and a panel-door format rather than a fixed glazed side element. These alternatives are not interchangeable descriptions of one product. Start with the function and overall format you need, then assess the options belonging to that product. This approach prevents an attractive design detail from leading you towards the wrong operating type. Explore related windows and doors:
Internal Panel Doors, Siegenia Sliding Doors, Single-Leaf Patio Doors – Inward Opening, Double-Leaf Patio Doors – Inward Opening, Patio Life Side-Sliding Patio Doors, Single-Leaf Patio Doors – Outward Opening, Fixed Window (Non-Opening), Round Fixed Window (Non-Opening).
08
Use a simple sequence to bring the choices together. First confirm that you need a non-opening sidelight in a fixed frame. Second, record the intended position and the relevant opening information for made-to-measure sizing. Third, choose pine, pine with aluminium cladding, oak or oak with aluminium cladding. Fourth, select the 2- or 3-pane glazing unit. Finally, choose the exact design and an available colour for that configuration. This order resolves the main functional decisions before the finer visual ones.
When selecting the design, copy its complete name rather than shortening it to a bar count. There are both glass-dividing bars and decorative bars in the list, and several options include a panel or vertical glazing. A note such as “two bars” is therefore not enough to identify one design reliably. State whether you mean the horizontal glass-dividing-bar option or one of the vertical-glazing designs with horizontal decorative bars, and include any vertical decorative bar and panel wording that forms part of the choice.
Before enquiring, gather one concise set of details: the required product type, its intended location beside the door, opening measurements with an explanation of what they represent, your preferred material, glazing pane count, complete design description and colour preference. Include any project-specific performance criteria that need to be considered when assessing the complete configuration. The Single-Panel Door Sidelight is CE marked and has a five-year warranty. Once your preferred combination is clear, we can help you identify the available Bloomcabin product choices that best match your enquiry.
Sidelight questions
No. This product is a fixed, non-opening sidelight rather than an additional door leaf. It remains fixed whether you choose a design without decorative bars, a horizontal glass-dividing-bar pattern or an arrangement that combines glazing, decorative bars and a panel.
Choose pine, pine with aluminium cladding, oak or oak with aluminium cladding. The standard pine or oak options and their aluminium-clad counterparts are separate material configurations, so decide which construction you want before confirming other details such as size, glazing and colour.
You can choose a 2- or 3-pane glazing unit. Both choices include a heat-reflective coating, a warm-edge spacer marked CHR and argon gas. Select the pane count required for your configuration without treating the number of panes alone as a complete statement of overall performance.
Our standard frame measures 105 × 57 mm. With aluminium cladding, the frame measures 115 × 57 mm. The change in the first dimension should be included when you assess the intended position and adjoining elements. Mounting holes are 14 mm.
Yes. Made-to-measure sizing is a purchase choice for this sidelight. Measure the intended opening and note whether your dimensions describe the opening itself or the product size you believe you need. Include the planned position beside the door when making your enquiry.
Yes. Colour choice is available. Choose from the colours offered when configuring your sidelight, then compare your preferred finish with the adjoining door, nearby frames, wall materials and visible fittings. It is also worth considering how the colour will work with the black rubber glazing seals.
There are nine listed designs: one without decorative bars, four horizontal glass-dividing-bar designs, one glazing-and-panel design, and three designs combining vertical glazing with decorative bars and a panel. Compare the exact option names carefully because bar counts, bar directions and panel arrangements differ.
Your Single-Panel Door Sidelight has a five-year warranty. Keep the confirmed product details and purchase information so you can identify the supplied configuration if you need support. The sidelight is also CE marked.
Choose the sidelight size, material, glazing, colour and design that suit your entrance. Share your preferred configuration and the opening information available when you enquire, and we will help you identify the appropriate Bloomcabin product choices for your project.
