Thermowood Barrel Sauna

Bloomcabin LCF 260 – 192 cm benches, 210 cm interior height and 2 heater choices

The Bloomcabin LCF 260 is an FSC®-certified thermowood barrel sauna for shared relaxation outdoors. Its exterior dimensions are 264 × 229 × 238 cm, with 192 cm benches and an interior height of 210 cm. Depending on the configuration, it can be paired with an electric or wood-burning heater. Before ordering, check the selected layout and included equipment.

This guide covers model choice, placement, heating and care. Always confirm the exact contents in your selected configuration. Discover further shapes, sizes and layouts in the Bloomcabin sauna collection.

What matters most with the LCF 260

The LCF 260 combines the familiar barrel shape with a taller cabin. Its exterior dimensions, bench length and suitability for your usual sauna routine are the key considerations. Include access and maintenance space when assessing the available area.

Choose occupancy to suit the way you use your sauna

When using the sauna together, keep both seats and access routes clear. Store extra towels and changes of clothing outside the cabin, and organize turns without crowding.

With fewer users, there is more freedom to choose a comfortable position. If the sauna will mostly be used by two people, weigh the benefit of longer benches against the footprint of the full sauna.

Suitable occupancy depends on body size, seating posture and personal space preferences. No fixed number of users is promised here. Check the capacity of the exact configuration before ordering.

210 cm interior height for added headroom

The LCF 260 has an interior height of 210 cm. Compare this with the heights of regular users. Because the barrel roof curves downward at the sides, headroom may reduce there; take the bench positions into account as well.

The taller cabin makes it easier to move around inside. Still, review the exact interior shape, entrance and bench arrangement for the version you select.

A bench length of 192 cm and an interior height of 210 cm are different measurements. The exterior height is 238 cm. Use exterior dimensions for site planning and interior dimensions for comfort planning.

Caring for outdoor thermowood

The LCF 260 is made from FSC®-certified thermowood. Thermal treatment reduces moisture uptake and improves dimensional stability, which is valuable for an outdoor sauna, but it does not make the wood maintenance-free. Sun, rain, splash water and changing humidity still affect timber surfaces and joints. Position the sauna so irrigation does not continually spray the barrel wall and runoff from a nearby roof does not fall directly onto it.

The naturally darker tone of thermowood complements many gardens, patios and cottages. Without a colour-preserving treatment, the surface can gradually weather to grey. That visual change should be distinguished from damage such as pronounced cracks, persistently damp areas or loose components. To retain the original colour for longer, use an outdoor thermowood care system in accordance with the manufacturer’s instructions. Test it first in an inconspicuous place, as it may alter the colour.

A sensible care routine starts with regular visual inspections. Check exterior wood, end grain, door areas, support points and barrel bands for noticeable changes. After severe weather, remove leaves and debris so moisture is not held against the wood unnecessarily. Use gentle cleaning methods indoors; aggressive or strongly scented products are unsuitable for heated timber surfaces. Let every surface dry fully after cleaning. Adjust barrel bands and structural parts only as directed in the assembly and care instructions.

Electric or wood-burning: which heater suits your plans?

An electric heater suits people who want to use their sauna regularly with minimal preparation. It avoids storing and adding firewood, but the site needs a properly planned electrical supply. Have cable routing, connection, controls and protective measures agreed with a qualified local electrical contractor before installation. Temporary extension leads and DIY connection work are not suitable. Technical components must remain accessible for inspection and servicing without blocking the path around the sauna.

A wood-burning heater suits those who want fire, firewood and manual heating as part of the sauna experience. It requires more preparation and supervision: dry firewood needs proper storage, the fire must be watched while operating, and ash remains afterwards. Chimney routing also influences where the sauna can stand. Consider trees, covers and nearby structures from the start. Choose this traditional option only if its ongoing work fits your routine.

With a wood-burning setup, ask the municipality and a qualified installer to confirm the heater-specific clearances, heat shielding, chimney route and any permit or fire-safety steps before installation. For an electric version, have a qualified local electrical contractor confirm that the selected heater is suitable for installation at the destination and plan the connection plus any local notification or inspection. Also verify whether the chosen configuration includes the heater, controls, sauna stones, chimney parts and protective components; selecting a heat source does not automatically include them.

A level, load-bearing base is required for this approximately 264 cm long sauna

The base must evenly support the full structure, including the heater, sauna stones and users. The appropriate foundation depends on soil conditions, terrain and local circumstances and should be settled before delivery. A surface can appear level but still settle under load or shift through frost and water. Every intended support point needs full support. Water must also drain beneath the sauna while adequate air circulation remains possible.

An uneven base can put the barrel profiles under strain, alter joints and affect door operation. Check level and elevation across the complete installation area, not only at the corners. After assembly, doors should open and close without force. Dragging doors, unusual gaps or changed alignment can indicate movement in the base; investigate the cause before simply adjusting hardware.

Water must not collect permanently beneath or beside the sauna. Shape the surrounding area so precipitation drains away and support points can dry. Cleaning water and cooling water also need a suitable route away. Do not place an outdoor shower where splash or wastewater regularly reaches beneath the sauna. Keep plants and accumulated leaves away from lower timber sections. An accessible base area is easier to inspect and maintain.

Comparing the LCF 260 with more compact saunas

The LC 225 can be the better option where every centimetre of installation space matters or only a few people usually sauna at once. When comparing models, consider more than garden length. Doors, exterior surfaces and technical areas must remain accessible for use, assembly and future care. A sauna should not merely fit mathematically between a fence and building.

The LCF 260 offers 192 cm benches and 210 cm of interior height. Its exterior dimensions are 264 × 229 × 238 cm. Consider whether this combination suits your garden and sauna habits better than a smaller model.

Compare exterior dimensions, bench length, interior height and confirmed room layout separately for each model. Do not transfer details from another sauna model to the LCF 260.

Plan changing, cooling and resting areas thoughtfully

Arrange the changing area so the entrance stays clear. Provide a dry place outside the heated cabin for belongings. Hooks and shelves must not obstruct walkways, the heater area or air circulation.

A sheltered nearby resting place can make sauna use more pleasant in rain or cool weather. Treat it as a separate area that neither crowds the sauna nor blocks maintenance access. If adding a roof or cover, account for the selected heating method: a wood-burning heater with a chimney has different requirements from an electric heater. Rainwater must drain in a controlled way and not run down the barrel wall or foundation.

If you plan an outdoor shower or plunge pool, make the route short, clear and slip-resistant. Avoid loose objects, hard-to-see edges and unnecessary steps. Plan separate drainage so the approach and sauna base do not stay wet. Keep the resting area outside the immediate splash zone. This helps maintain distinct areas for changing, sauna use, cooling and resting.

Who is the Bloomcabin LCF 260 suited to?

The LCF 260 is suited to shared sauna evenings. Consider bench length, interior height and the specific occupancy of your chosen version. Children require close adult supervision and a well-organized entrance area.

The classic barrel profile can suit many cottage settings, but changing guests call for clear responsibilities. Keep easy-to-follow instructions for operating the heater, airing out and drying the sauna available. With a wood-burning heater, firewood, ash disposal and fire supervision must be reliably managed. With an electric heater, users must understand that the connection must not be altered. Between stays, a responsible person should inspect the interior, doors and heater area. The heating choice should therefore fit the property’s management plan.

For couples, the long benches and taller cabin may be appealing. The sauna requires its full footprint regardless of occupancy, so compare that space requirement with more compact models.

Weather, privacy and easy access all matter

Choose a short route from the house that can be lit without glare and kept slip-resistant in rain, snow and freeze-thaw weather. Make entrances, steps and turns easy to see. While choosing the site, look for narrow points, steep grades and loose surfaces, and allow for routine snow clearing without blocking the sauna door. Keep barbecues, play areas and busy paths away from the entrance.

Privacy and accessibility should work together. Dense planting can provide screening, but it should not rest permanently against timber walls or prevent inspection. Consider fallen leaves, overhanging branches and the reach of irrigation systems. Large trees often mean extra cleaning, and with a wood-burning heater they can complicate chimney planning. Leave enough room around the sauna for drying, cleaning and technical work.

Also consider the exposed side of the property. Doors and timber surfaces face greater stress in open locations, while tight, poorly ventilated corners can hold moisture longer. Screening must not replace required clearances or stop airflow completely. Leave room to inspect exterior surfaces and apply care products. If a cover or privacy screen is added later, review drainage, access and, where relevant, chimney routing again.

Before ordering: check the configuration, delivery route and site

Review the selected product configuration in full. Depending on the version, the equipment and scope of supply for the heater, controls, sauna stones, chimney parts and protective components may differ. The order must match your intended heating plan; images of other versions are not a reliable basis. Also establish which tools, fixings and on-site work are needed for assembly and connection. This helps avoid delays caused by missing parts or unresolved connections.

Check vehicle access, the unloading area and the entire route to the prepared base. Prefabricated components can simplify assembly, but they do not automatically fit through every gate, wall opening or tight turn. Stairs, slopes, overhanging branches, low roof edges and delicate surfaces may also complicate transport. Before delivery, identify a safe unloading zone and a dry, orderly place for temporary storage of components.

Rules can differ by province or territory and municipality. Before fixing the site, ask the relevant municipal authority whether zoning, setbacks, a building permit, structural review or approval for a chimney or solid-fuel appliance applies to the property, and coordinate electrical and chimney work with qualified local trades. Canada’s national model codes do not, on their own, establish the requirements at every address; confirm the code and local rules adopted for the project. General product details are not project approval. Find more planning guidance under Useful information.

Check before heating, air out thoroughly after use

Before switching on or lighting the heater, make sure the heater area is clear of towels, robes, cleaning supplies and other combustible items. Doors and walkways must remain unobstructed. Children may use the sauna only under the direct supervision of a responsible adult. Anyone unsure whether sauna use is appropriate for their health should seek medical advice first. Do not use the sauna under the influence of alcohol.

Always operate the heater according to its instructions. Pour water onto suitable sauna stones only as intended; do not use other liquids or unsuitable additives on the heater. A wood fire must be supervised throughout operation. Air the cabin after the final session and allow it to dry completely. With the wood-burning version, inspect the firebox, cooled ash and visible chimney sections regularly. Handle ash only when no embers remain.

Clean towels on the benches and prompt removal of dirt help protect interior surfaces. Let benches and floor dry, and remove damp textiles. Stop using the sauna if there is smoke, an unusual smell or a malfunction, then have the cause assessed by a qualified professional.

FAQ – Bloomcabin LCF 260