Bloomcabin Prestige Premium greenhouse
Prestige Premium – aluminium greenhouse with enclosed base panels and combinable glazing options
The Bloomcabin Prestige Premium greenhouse combines productive growing space with enclosed aluminium base panels. Unlike a fully transparent structure extending to ground level, pots, compost and working materials are less visible at the bottom. Beside a house or terrace, it creates a calm-looking garden room while the glazed roof and walls retain their bright character.
The range includes compact and spacious models. Alongside floor area, the ridge and door heights vary by width. This lets you match the greenhouse to available space, planned paths and planting areas.
Before choosing, consider summer sun, winter use, views from the house, the foundation and rainwater routing together. These factors affect not only glazing, but also the positions of the door, roof vents and work areas. Defining future use first helps you select permanent components carefully and keep the interior flexible later. More about Bloomcabin in Malta.
Sheltered base area
Enclosed aluminium base panels for greater privacy at low level
The aluminium cladding forms an enclosed backdrop at the base. In front of it, planting tables, shelving and larger containers look more orderly, while everyday gardening equipment is less immediately visible from outside.
This is particularly useful when the greenhouse stands beside a terrace, a well-used garden path or within view of living spaces. The cladding provides more privacy at low viewing height. Check the proposed position from the house, garden and main seating areas.
The upper walls and roof remain glazed, so plenty of daylight still reaches the growing space. The transition to the enclosed base is important for interior planning: small, light-hungry plants should not stand permanently right at the edge where they receive less side light.
Choose the right size
Compact to spacious models for different garden layouts
Enclosed base panels
Conceals low-level work and storage areas
Glazing to suit
Balance light, privacy, solar control and maintenance
Match the colour
Coordinate the frame with house, terrace and garden
Choose glazing carefully
Select glazing for plants, privacy and sun exposure
Prestige is available with polycarbonate, 4 mm toughened safety glass and selected specialist glass, including self-cleaning, mirrored, solar-control and matt white glass. Each option has a different focus. Consider whether maximum light, reduced visibility, protection from strong sun or easier cleaning matters most.
The roof and sides can use different glazing. For example, the roof can prioritise high light transmission while a visible side gains more privacy. Assess every side separately, since sun path, neighbouring property, terrace and existing planting do not have the same effect from every direction.
The right combination depends on the site, orientation, plants and intended use for growing, relaxing or plant collections. Light-demanding crops need suitable illumination; for seating, glare and overlooking may matter more. Resolve this trade-off before ordering permanently installed panes.
Prestige at a glance
Key dimensions and features
Model range
22 configurations, 3.77–28.08 m²
Choices for gardens and uses of different sizes
Narrower model range
235 cm wide
Ridge height approx. 231 cm; door height approx. 165 cm
Wider model range
310 cm wide
Ridge height approx. 267 cm; door height approx. 185 cm
Base area
Enclosed aluminium base panels, 79 cm high
More privacy for the lower interior
Glazing and door options
Polycarbonate, 4 mm toughened safety glass and specialist glass
Single sliding door or double sliding door from 310 cm wide
Equipment and colour choice
Roof vents, gutters, integrated aluminium base frame and 37 RAL colours
12-year manufacturer guarantee
Ventilation and temperature
Coordinate roof vents, glazing and optional heating
Every Prestige has roof vents. They are opened manually as standard; automatic temperature-controlled openers can make daily operation easier. Plan paths and interior layout so manual openers remain accessible and can be operated without moving furniture or plants.
On strongly sunlit sites, solar-control glass or temporary shading may be helpful. Where light is lower, avoid unnecessarily reducing the brightness available to plants. Optional heating can extend the season, but must suit the plants and be professionally installed.
When planning the site, decide where water from the integrated gutters will run. Outlets, falls and overflow must prevent water collecting at the foundation and keep paths clear. Accessible connections make later inspection and cleaning easier.
Ways to use it
Four ideas for the Prestige interior
01
Vegetables and propagation
For vegetables, young plants and an extended growing season, divide the interior into beds, planting tables and accessible paths. The enclosed base forms a useful backdrop for work areas, while taller crops can grow into the glazed upper section. Plan watering and ventilation alongside planting from the outset.
02
Garden seating
With suitable seating, the interior can occasionally serve as a sheltered garden retreat. The base panels reduce low-level views in and create a tidier appearance. Movable furniture is more practical than fixed fittings, as it can be repositioned during intensive growing periods, cleaning or overwintering larger plants.
03
Sensitive plant collection
For citrus, tropical species or other collector plants, glazing, ventilation and optional heating can be tailored to plant needs. Different requirements should not be treated alike. Separate zones, movable containers and sufficient space let sensitive specimens be positioned nearer to or further from the door when needed.
04
Garden design feature
The wide colour choice lets you coordinate the aluminium frame with the façade, window profiles, terrace or other garden features. View colour samples in natural light where possible, as surroundings, shade and glass change their effect. The enclosed base makes the frame colour more prominent than a fully transparent base.
Site and use throughout the year
Site, foundation, sun exposure and water management determine whether the chosen version remains suitable over time. Also check the delivery route to the assembly area, access through the door, clear maintenance space and possible service routes. The location must work for plants as well as assembly, cleaning and later service.
Heat on sunny sites
South- and west-facing positions can become very warm on clear summer days in Malta. Choose glazing, shading and ventilation according to actual exposure at the proposed site. Watch shade from buildings and trees through the day: a sheltered morning position can remain in direct sun for long afternoon hours.
Roof vents release rising warm air. Tall crops, shelving and supports should not obstruct airflow. On very hot days, opening the door can provide additional short-term ventilation. Regularly monitor temperature and plant condition.
Solar-control glass is particularly suitable for permanently sun-exposed areas, while movable shading can be adjusted seasonally. Match the solution to the crops, as young plants, fruiting vegetables and overwintering container plants have different light needs. Chosen glazing is permanent; temporary shading remains flexible.
Foundation and ground conditions
The integrated aluminium base needs a level, load-bearing surface suited to the site. The greenhouse has wind resistance up to 30 m/s and a snow load of 210 kg/m². These values require professional anchoring and assembly to product instructions; they do not replace a site-specific assessment of soil and local loading.
Movement in the ground can affect door travel, frame alignment, glazing and water drainage. The foundation build-up should therefore be professionally determined from local ground conditions. A continuously level bearing surface and secure anchoring are especially important. Correcting a stressed structure later is more demanding than careful preparation.
Foundation depth, drainage and finished assembly height must be established before installation. Include the later internal floor and the threshold transition. This avoids unexpected steps and directs water away from the greenhouse. Altering ground levels after assembly can affect access, door function and connection details.
Privacy near house and terrace
Base panels mainly screen the lower interior from direct views; above them, plants and furnishings remain visible through the glazing. Consider what will stand below glazed areas and which tall plants or shelves will project above them. Arrange the interior around sightlines from terraces, paths and windows.
Place planting tables and storage so frequently used items are near the door and paths stay clear. Work zones can sit on the side facing away from the principal viewpoint if it still has the required light. This combines short working routes with a tidy outside appearance.
Surrounding planting can soften the transition between greenhouse and garden. Keep sufficient clearance from gutters, glazing and base panels so cleaning and maintenance remain possible. When selecting plants, allow for mature spread and height, not only their size when planted.
Collecting and directing rainwater
Integrated gutters can direct rainwater to a tank or drainage system. Plan the route so hoses or pipes do not obstruct the door, care paths or later maintenance. A tank should stand securely, remain accessible and allow short routes to the growing area.
For a larger model, a suitably sized rainwater store may be useful. Capacity depends on roof area, local rainfall, available space and plant water demand. Choose a solution with reserve capacity and controlled overflow for wetter periods.
The overflow must reliably take excess water away from the foundation without creating puddles or erosion on adjoining surfaces. Connections, downpipes and cleaning points should remain accessible. Reachable filters or leaf guards can simplify maintenance when checked regularly.
Plants and interior
A well-considered layout makes plant care, air exchange and later changes easier. Start with fixed points such as the door, vents and water connection. Then arrange the main path, work zone and standing areas without furniture concealing technical parts or narrowing necessary circulation space.
Plan the interior
The enclosed base creates a calm backdrop for worktables, shelves and raised planting areas. As less side light reaches the lower edge, small plants needing strong light should stand at a suitable height. Heavy containers need a load-bearing, stable surface where watering can be contained or drained.
Leave enough central space for watering, potting and carrying trays. A scale plan helps assess path widths, table sizes and turning areas realistically. Draw open doors, projecting shelves and mature plants too, so the route is not only wide enough in an empty greenhouse.
Furniture and plants must not block roof vents, doors or glass needing cleaning. Leave enough room between wall-side shelving and the structure to prevent moisture accumulating. Frames, panels and fixings should remain visible and accessible so changes are noticed early and affected areas can be cleaned easily.
Tall crops
Tomatoes, climbing plants and larger specimens can use the height of the glazed upper area. Allow for mature size and required supports when planning the layout. Attachments may only be fitted at suitable points; glazing, vent frames and moving mechanisms are not plant supports.
The best position for tall crops depends on incoming light and airflow towards the roof vents. Arrange plants so lower crops are not shaded all day. Seasonal repositioning supports different crop rotations without altering fixed fittings.
Very tall plants must not interfere with the door, vents or opening mechanisms. Adequate care paths make tying, pruning and harvesting easier without damaging delicate shoots. Leave enough gap between spreading foliage and glazing so panes remain reachable and damp plant parts do not rest against them.
Automatic ventilation
Temperature-controlled roof openers can simplify daily ventilation by responding to rising internal temperatures. They are especially useful when nobody is present during the day. Check greenhouse conditions regularly nonetheless, because sun, plant mass and season alter ventilation needs.
For reliable operation, roof vents must remain free to move. Climbing shoots, strings and hanging items must not obstruct either windows or mechanisms. Before forecast severe weather, follow the manufacturer instructions for operation and securing.
Roof vents and opening mechanisms must remain accessible for inspection, cleaning and maintenance. Remove dirt and plant growth before movement is restricted. Checks are particularly useful before prolonged hot periods and before winter.
Specify glazing for each surface
First give every glazed surface its principal purpose. Solar-control glass suits heavily sunlit areas, matt white glass can reduce views in, and self-cleaning glass can ease exterior maintenance. Mirrored glass primarily affects the outside appearance. Choose for site and function, not solely for a uniform look.
Record the selected glass type for every roof and side surface in a clearly labelled sketch. Before ordering, this helps confirm that sun-exposed, overlooked or difficult-to-reach areas have been considered appropriately. Clear allocation also makes the final configuration easier to check.
Also assess transitions between glass types from key views in the garden and house. Functionally chosen surfaces can look different with changing light and surroundings. An elevation sketch helps balance privacy, solar control and the overall appearance before finalising the combination.
Coordinate permanent choices properly
Plan permanently installed elements in technical order: the foundation sets assembly height and orientation, the door position determines main access, and glazing influences planting layout. Then route rainwater and irrigation lines so they do not cross these established paths and work zones.
Floor and work surface
A robust internal floor makes watering, potting and cleaning easier. Surface and drainage should suit intended use: secure footing matters in work areas, while regularly watered planting zones need controlled drainage. Choose a surface that works safely when wet and can be cleaned with mild products.
Paving, gravel or other suitable surfaces can be coordinated with the threshold and foundation. A level transition, dependable drainage and lasting load-bearing construction are essential. Loose material must not interfere with door travel. With fixed finishes, falls and connection heights must be set before assembly.
Finished floor height must be known before fitting fixed work surfaces, shelving or irrigation lines. Allow for cleaning, possible lines below the floor and a comfortable working height. Raising the floor later can affect door connections and base panels; a floor set too low can create unwanted steps or water accumulation.
Irrigation
Larger Prestige models benefit from a clearly planned water supply with short, unobstructed routes. Decide where water is drawn, distributed and shut off during extended disuse. Lines should neither cross main paths nor make cleaning harder. Separately controllable planting zones help accommodate different water needs.
Drip irrigation can avoid loose hoses, keep paths free and deliver water directly to plants. Drip points and run times must suit plant type, container size and season. Check regularly for blocked outlets or leaking joints so unnoticed water escape does not affect plants or the internal floor.
Filters, shut-off valves and water connections should be easy to reach for use, cleaning and protection during cooler weather. Route external and internal lines clearly so faults can be checked. Drain or protect water-carrying parts according to their design before cold spells. Avoid inaccessible places where residual water can remain.
Maintenance access
Glazing, gutters, doors, vents and base panels need regular inspection and cleaning. Leave sufficient access around the greenhouse. Use mild products and soft tools suitable for each surface. Abrasive aids can damage glass, coatings or aluminium.
Dense hedges, walls or fixed furniture must not make external faces and technical components inaccessible. Nearby plants should be prunable without endangering glazing. Adequate clearance also helps clean gutters, inspect fixings and remove leaves at the base.
A narrow, permanently clear maintenance strip supports care and minor service work. It should be easy to walk on and not used for storage. Check on the site plan that sides facing away from the house or a boundary remain accessible, as dirt and growth can otherwise be overlooked.
Future flexibility
Plant collections and intended uses can change over the years. Reserve an area that is not permanently occupied by fixed furniture or fittings. This free zone can later hold larger containers, additional propagation space or occasional seating, while also supporting more extensive maintenance.
Prestige may initially serve vegetable growing and later accommodate citrus, ornamental plants or a seating area. With such a change, adjust light, temperature and watering to the new use. The structural specification should meet the most likely long-term requirement, not only one season.
For movable tables, shelving and containers, ensure castors or glides suit the intended floor. Mobile items should be secured against unintended rolling. Also plan a parking position where moved equipment does not block paths, doors or access to the glazing.
Before ordering
Confirm foundation, orientation and glazing before ordering
Before ordering, clarify available footprint, access, required clearances, possible permissions and foundation area. Requirements depend on the site and project; for Malta, ask a perit and the Planning Authority to confirm the applicable classification and conditions. Measure access routes, gates and narrow points so all components can reach the assembly area.
Mark strongest sun directions and the sides facing neighbours, terrace and living areas on a site plan. Add trees, roof edges and other shade sources. This supports informed decisions on glazing, privacy and ventilation. Mark door access and the main route before confirming the final orientation.
Prepare a level, stable base and the end point for rainwater drainage before assembly. Check dimensions, right angles, levels and service connections before work starts. Keep the assembly area clear and accessible so profiles and glazing can be handled without unnecessary moving or contact with hard surfaces.
Plan further with Bloomcabin
Helpful pages on greenhouse choice, ordering, guarantees and product details
Frequently asked questions
Questions and answers about the Bloomcabin Prestige Premium greenhouse
Which model size suits my needs?
Plan paths, planting tables, beds and the mature size of your crops first. Then compare available floor area, model width and door solution. This helps you choose not merely a greenhouse that fits the garden, but one with sufficient usable interior space.
How much clear space should remain around the greenhouse?
A universal minimum cannot be given without site and assembly details. Plan a continuously walkable working area around it, keeping glazing, gutters, connections and fixings accessible. Leave extra room in front of the door for unobstructed access and moving plant containers.
How do base panels affect planting?
The base panels reduce side light directly at the lower edge. Small plants requiring strong light are therefore better raised or positioned slightly further in. Planting tables, larger containers and work areas can be placed effectively against the enclosed surface.
Should glazing for every side be decided before ordering?
Yes. Check sun exposure, overlooking, plant requirements and cleaning access separately for roof and sides. Since replacing permanently fitted panes later is demanding, the combination should be clearly established before ordering.
Can roof and sides have different glazing?
Yes. Select suitable glazing separately for roof and sides during configuration. For example, combine high roof light transmission with greater privacy or solar protection on a particular side.
When is a double sliding door worthwhile?
A double sliding door is useful if wide plant trays, equipment or large containers are moved in and out regularly. Also check that the wider opening works with planned paths, planting tables and the rest of the interior layout.
Are automatic roof openers necessary?
No. Manual openers are standard. Automatic temperature-controlled openers are an additional option when the greenhouse heats quickly on sunny days or nobody is regularly present during daytime.
Which documents should I keep?
Keep order documents, product information and assembly instructions permanently. They contain important guidance on foundations, assembly, use and care, and can help with later maintenance or service questions.
Bloomcabin Prestige Premium greenhouse
Configure Prestige Premium for site and use
First select the appropriate size and door solution. Then assign your chosen glazing to individual roof and side surfaces and add frame colour and equipment. Before completing your order, check that the configuration aligns with foundation planning, door access and intended service routes.
Pre-order checklist
✓ check available space and maintenance access
✓ define the site and key sightlines
✓ specify roof and side glazing
✓ coordinate frame colour with house and garden
✓ plan doors, vents and rainwater drainage
✓ check foundation dimensions and finished assembly height
