Premium Outdoor Sauna

Elma L outdoor sauna – large glass front and three bench options

The Bloomcabin Elma L combines a generous glass front with a bright thermo-aspen interior and accommodates up to four people. With external dimensions of around 222 cm wide, 218 cm deep and 242 cm high, it sits between a compact sauna for one or two people and a larger sauna cabin. It suits households that use a sauna together regularly or couples wanting more freedom of movement. Three bench options offer different seating directions and reclining possibilities.

This guide helps you coordinate size, equipment, location and technical preparation. Explore further designs and sizes in the Bloomcabin sauna range.

What distinguishes the Elma L

The Elma L’s key features cover capacity, external dimensions, bench design and material construction.

Thermo-aspen inside, thermo-spruce outside and clear glass at the front

The thermo-aspen interior lining gives the Elma L a light, tranquil atmosphere. LED strips behind the backrest provide indirect light without interrupting the clean interior design. During the day, the glass front makes the room feel open and spacious. In the evening, indirect lighting highlights the timber surfaces and aids orientation without becoming a conspicuous focal light source.

The exterior of the Elma L is clad in thermo-spruce. Available surface finishes let you coordinate the sauna with the house façade, terrace and garden design. Natural-looking timber finishes blend discreetly into their setting, while darker versions can create stronger contrast. Judge the choice using the entire visible exterior and the light at the installation site. Paving, timber decks, walls and other neighbouring materials also affect the overall impression.

The rectangular structure uses 60 mm CLT construction. Doors and windows are made from 8 mm clear glass; black anodised profiles visually frame the transparent surfaces.

Clarify foundation, weight and electrical connection before assembly

The Elma L weighs approximately 1,265 kg without a heater. The base must support this weight permanently and evenly. A surface that appears level is not automatically sufficiently load-bearing. This particularly applies to existing terraces, made-up ground and raised platforms. If unsure, have the supporting structure, substructure and load transfer assessed for the sauna. The foundation must also permit level, accurate assembly so the structure cannot distort through settlement later.

The technical data specifies a three-phase 400 V, 50 Hz supply. Before foundation work, clarify the cable route and handover point at the intended connection area. This avoids later cable runs across walkways or visible exterior surfaces. Selection, protection, connection and testing of the electrical installation must be handled by a qualified professional. Manufacturer documentation, the specific equipment and technical and local site requirements are decisive. In Malta, use a REWS-authorised professional with the appropriate scope.

When planning the location, also consider the area around the sauna. Leave sufficient space in front of the door for arriving, setting down towels or bathrobes and cooling down. If an outdoor shower, pool, lounging area or pergola may be added later, include service routes, drainage and paths in the first site plan. This allows later additions without blocking sauna access or maintenance areas.

Check early which planning, boundary, electrical and, where relevant, fire-safety requirements apply to your site. In Malta, ask a perit to confirm the Planning Authority classification for the specific proposal, as requirements vary by site and design. Further planning guidance is available in guidance for planning your Bloomcabin sauna.

Which situations is the Elma L designed for?

Typical occupancy, the desired seating posture and integration of the Elma L into the outdoor area determine suitable use.

Elma L or Elma S – compare the real space requirement

The Elma S is especially suitable where one or two people usually sauna and the smallest possible footprint is essential. It suits locations where extra space would restrict paths or other garden areas.

In direct comparison, the Elma L is the better choice when the more compact Elma S is insufficient for typical occupancy or the desired seating arrangement. The larger version must, however, fit sensibly within the foundation, access and site layout.

Both models belong to the same product family in design terms. Your decision should therefore chiefly depend on usual user numbers, available footprint and preferred bench arrangement. Mark out both footprints at the site as a trial. This shows which option leaves adequate room for paths, neighbouring garden features and installation.

Plan access, cooling-down space and use in every season

Plan the route between home and sauna as part of everyday use. It should be direct, adequately lit and safe to walk on in wet weather. Avoid unnecessary steps, loose finishes and narrow sections. A separate cooling-down area is advisable so the door area remains clear. During Malta’s wetter winter months, clear away leaves and dirt and address slippery surfaces; in summer, garden furniture and planting should not narrow access.

After sauna use, remove textiles and visible dirt, then ensure the interior can ventilate and dry fully. Check that the door and glass surfaces close freely and that there are no unusual signs on timber, seals or fixings. A brief check after each use helps identify changes early.

For ventilation, drying and care, follow the guidance for your chosen version . Keep it readily available for regular maintenance.

Straight bench, corner bench or ergonomic version?

The straight bench reinforces the clean, uncluttered interior design. Everyone faces the same main direction, and the open floor area remains easy to oversee. This option works particularly well where only a few people usually sit side by side or a linear design is the priority. Before ordering, check the illustration for your chosen version so the bench position and layout meet your expectations.

With the corner bench, seating is arranged along two sides of the room. Users face each other more directly, which can be pleasant during shared sauna sessions. The corner shape also affects how easily people take a seat, stand up and pass others. Alongside user numbers, consider whether children, adults of different heights or people with different seating habits will sauna together regularly.

The ergonomic version is designed for a more supported, relaxed posture. It is an option when comfortable reclining matters more than a neutral seating surface. Which shape feels comfortable depends on body height, preferred posture and sauna-session duration. Compare the product illustration and scope of delivery for the specific version rather than deciding from the name alone.

Choose the bench version before completing the order. If users have different preferences, prioritise the most frequent use case and the posture of those who will use the sauna regularly.

Organising shared sauna sessions practically

When several people use the Elma L, keep the area directly in front of the door free from shoes, textiles and other items. Create a fixed storage place beside it that does not narrow entry and exit. Garden furniture, planters and sauna accessories should also not stand in the door swing or walking area. An orderly access zone is more practical in daily use than a densely decorated area.

During shared use, keep personal belongings on the storage area outside the movement zone, and ensure everyone can reach the exit. Arrange seating so people wishing to leave earlier can exit without unnecessary moving around. The respective bench geometry and user instructions provide the framework.

Where possible, divide the outdoor area into zones for arriving, cooling down and resting. This prevents splash water and stored items from reaching the direct access route. If a shower or pool is nearby, drain water so the doorway and foundation do not remain wet.

Coordinate the view and privacy screening with the glass front

The transparent front makes careful assessment of sightlines worthwhile. Stand at the planned location and consider both directions: what view will sauna users have, and from which paths, windows or neighbouring areas is the interior visible? Repeat the check at approximate seated height. A location that feels sheltered while standing may allow unexpected views from a lower perspective.

Planting and suitable privacy screens can reduce side views but must not obstruct access or maintenance of exterior surfaces. With plants, allow for their mature size and seasonal leaf loss. Check the site after dark too, as an illuminated interior may be more visible outside. Exterior lights should make the route clear without creating distracting reflections in the glass front.

Coordinate the outlook, screening and access side before preparing the foundation. Mark the building corners and glass-front line on the site. This makes the eventual orientation far more realistic to assess before work begins.

Keep sufficient room for installation, inspection and care

External dimensions describe only the structure, not its complete space requirement. During installation, components must be transported to and handled at the site. After assembly, exterior surfaces, connections and the transition to the base should remain accessible. Do not position the sauna so tightly between fences, walls, buildings or permanent planting that side access is barely possible.

Adequate maintenance access makes it easier to inspect exterior timber, glass, seal areas, fixings and water drainage. These areas should not permanently disappear behind decoration, dense growth or stored objects. Allow for the future space requirement of nearby plants and avoid places where leaves and moisture can collect directly against the structure.

Reserve this access permanently as a walking and service route, rather than using it for bins, bicycles, garden tools or seasonal furniture.

Check the delivery route and assembly area before ordering

Walk the entire route from the property entrance to the planned location. Note garden gates, bends, steps, slopes, low passages, overhanging branches and delicate ground surfaces. Even a wide entrance does not help if the final section passes through a narrow side path or lawn unable to carry loads. Keep photographs and relevant measurements ready for discussion with the delivery or assembly partner.

By the agreed assembly date, the foundation and electrical planning must be appropriately prepared. Remove stored materials, garden furniture and planting from the work zone. The area around the installation site must also be suitable for assembly; soft ground or unsuitable temporary coverings can make work difficult. Clarify in advance who will check the completed foundation level before assembly.

Record in writing who arranges delivery onto the property, assembles the sauna and undertakes the electrical connection. It should also be clear which preliminary work you must complete in good time. Ask whether packaging or transport aids will be stored temporarily on the property. A clear sequence prevents delays between foundation work, assembly and electrical connection.

Record the chosen version and scope of delivery clearly

Before submitting the order, compare the chosen bench arrangement and surface finish with your site plan. Use unambiguous descriptions and retain the order confirmation. Where several people or trades are involved, everyone should work from the same current plan. This prevents older sketches or changed preferences from being used accidentally.

Check individually which components and services belong to the ordered version and what is not included or must be planned separately. This is particularly important when coordinating the sauna, heater, electrical connection and planned outdoor additions. Do not rely solely on product images for construction preparation; use the documents for the configuration actually selected.

Keep order documents, site sketch, foundation information, electrical plan and contact details for involved professionals together. This gives everyone the same information when questions arise. Assembly, operating and care instructions should remain easily accessible after installation.

Direct rainwater and splash water away from the structure

The base must drain water so persistent standing water cannot form beneath or directly beside the sauna. In addition to normal rain, consider water that may flow from neighbouring surfaces, roof areas or higher ground towards the site. Moisture can collect in an adjacent hollow even when the foundation surface is dry. Drainage must therefore suit the soil, gradient and property conditions.

Test drainage routes practically after completion. Water should not run towards the entrance, across the main path or into areas where it could become slippery after rain. Remove leaves, soil and plant debris before they obstruct open drains. An outdoor shower needs separate water management because it creates a more frequent, concentrated flow than rainfall.

Do not subsequently bank soil, gravel or decoration directly against the underside of the sauna. After garden work, check that the intended ground level and ventilation beneath the base remain intact. Have the causes of settlement, washout or standing water clarified before the base or structure is affected.

Organise regular care by component

Divide regular inspection into the interior, glass surfaces, outer shell, access route and base. Inside, focus on cleanliness and visible changes to the timber. At the glass, check dirt and adjacent sealing elements. Outside, look for deposits, mechanical damage and areas that stay wet unusually long. Also inspect the walkway, base and water drainage. Dated notes help identify changes over time.

Use only cleaning and care products expressly suitable for the relevant material. Unsuitable coatings or cleaners must not reach timber, glass or sealing elements. Work on electrical components is not part of normal cleaning and should be left to the responsible professionals. Intervals and work steps follow the assembly, operating and care instructions for the chosen version.

FAQ – Bloomcabin Elma L