Thermowood Barrel Sauna

Bloomcabin N 210: barrel sauna with changing room for electric or wood-fired heater

The Bloomcabin N 210 is a compact barrel sauna for anyone wanting an entrance area separate from the sauna room without installing a large garden sauna. Its round structure is divided into the heated sauna room and an adjoining changing room. This means you do not enter the hot space directly from the garden and have a sheltered place to arrive before your sauna session. On a limited garden footprint, this layout can be more practical than a longer, undivided interior. Whether it suits you depends on your routine and site conditions. Check the internal layout, heating option, base and routes between the house, sauna and cooling area.

This guide explains what matters for the N 210’s layout, material, location and use. Explore further designs and sizes in the Bloomcabin sauna range.

What the N 210 equipment means in everyday use

Do not compare individual dimensions alone. The combination of layout, internal height, material and technical preparation shows whether the N 210 suits your plot and sauna habits.

FSC®-certified thermowood in classic barrel construction

The N 210 is made from FSC®-certified, thermally treated wood. Heat treatment reduces moisture uptake and improves dimensional stability. That is beneficial for a sauna permanently outdoors, where the structure is exposed to changing humidity and rainfall. Thermowood is not maintenance-free, however. Rainwater must drain freely, and moisture must not collect around the lower timber sections. Air should also circulate beneath the structure so the wood can dry again after wet weather.

The round barrel form does more than define the appearance of the N 210. Inside the sauna room, the ceiling follows the curved cross-section, so there are no tall, unused corners. At the same time, there are fewer straight wall surfaces than in a rectangular structure. Assess the position of doors, benches and circulation areas using the product drawing, not external dimensions alone. Its distinctive timber form can suit classic gardens, timber terraces or holiday homes without requiring an exclusively rustic setting.

As a natural material, wood can move with seasonal changes, alter in colour and develop visible signs of use. Regularly inspect the barrel bands, fittings, door operation and accessible timber areas. Any adjustment or care work must follow the product and assembly instructions. Unsuitable film-forming treatments, or treating heated interior surfaces without expressly confirmed suitability, can affect finishes and the sauna experience. Appropriate material care matters more than applying coatings as often as possible.

Plan heating, base, access and drainage

Depending on the available configuration, the N 210 can use electric or wood-fired heating. For an electric heater, a REWS-authorised professional with the appropriate scope should plan and install the correct supply for the intended site. The specifications of the selected heater are decisive; an existing outdoor socket is not automatically sufficient. Clarify the cable route, position of required components and access for testing and maintenance early. This avoids temporary visible cables or reopening components after assembly. A wood-fired heater needs different preparation. Obtain project-specific advice from competent professionals on the flue, suitable heat protection, fire clearances, safe operation and applicable local requirements. The position relative to buildings, boundaries, planting and combustible items can also affect the chosen location. Store firewood dry and safely without narrowing escape or operating routes. Choose not only for atmosphere, but for the heating option whose technical and practical requirements can be met reliably on your property. Before ordering, check exactly which heater, control and accessories are included with the selected configuration. Product images may show features that are not automatically included with every version. Assembly and commissioning must follow the documentation for the sauna, heater and selected additions. Do not alter safety clearances or structural components for visual reasons.

The sauna requires a permanently level, load-bearing and professionally prepared base. Depending on the property, a concrete slab, suitable paved area, point foundations or structurally designed terrace construction may be appropriate. The right solution depends on ground conditions, substructure and intended bearing points. Grass that appears level is not enough: settlement can jam doors, strain components or direct water the wrong way. Before construction, check the support points and every requirement in the assembly instructions.

Plan drainage and ground clearance when preparing the base. Rainwater must not collect beneath the sauna or directly around lower timber sections. The surrounding surface should lead water away reliably while the sauna itself remains level. Roof or surface water from neighbouring buildings must not run onto the barrel structure either. A ventilated underside helps drying after rain. At the same time, the substructure must safely support every intended bearing area and must not sink through loose or yielding materials.

Also plan the delivery and assembly route. Narrow gates, walls, hedges, steps or low roof overhangs can complicate delivery and installation even if the completed sauna fits the intended space. Leave sufficient working room around the assembly site. In Malta, ask a perit to confirm the Planning Authority classification, considering footprint, height, enclosure, land designation and existing permit conditions; a removable kit or garden location does not by itself establish permission. Check boundary, electrical and any project-specific fire requirements, and coordinate the necessary specialist work. Further guidance is available under Useful information.

When the N 210 fits your garden and sauna routine

The N 210 is especially appealing for its combination of changing room, greater internal height and compact barrel form. In the following situations, these features can be particularly useful.

N 210 or a barrel sauna without changing room?

With HC150 and HC180, the available length is entirely dedicated to the sauna room. These models may suit you when the installation area must remain as small as possible and a separate entrance area is unnecessary. External length is only an initial guide. More important are the interior layout and whether there is already a sheltered place beside the sauna for changing or storing textiles.

The N 210 deliberately uses part of its overall length for the changing room. This makes sense when textiles should not be kept in the hot area or the outside door should not lead straight into it. In return, that part of the footprint is not available as extra sitting or lying space. Buyers should therefore consider whether spatial separation matters more than a sauna room extending along the full length. Reviewing the product drawing helps assess door positions, bench layout and circulation areas realistically.

If you want a changing room and have more space at the site, the larger N 250 is a useful comparison model. The N 210 is the more compact solution for properties where the footprint must remain limited. Measure more than the clear floor area. Include access, door swing areas, side working space and all locations requiring later maintenance. Only this overall assessment shows which model truly fits the intended location.

Safe access, proper drying and gentle timber care

The route from the house to the sauna should be free from trip hazards, as slip-resistant as possible when wet and adequately lit. Lights must neither dazzle nor be fitted where they affect hot or electrical components. An outdoor shower, cold-water tub or sheltered sitting area can be planned for cooling down. Arrange these areas so no one needs to walk with wet feet over loose stones, smooth surfaces or unlit steps. Water from the cooling area must not run towards the foundation or beneath the sauna. After every sauna session, moisture must be able to escape. Ventilate and dry the interior in line with the use instructions before the sauna remains closed for a prolonged period. Remove damp towels, bathrobes and infusion accessories from both sauna and changing room. This helps prevent odours, permanently damp contact surfaces and unnecessary stress on the wood. Before longer breaks in use, carry out a visual inspection so small issues are not first noticed at the next heating cycle.

Clean seating and contact surfaces gently without soaking the timber with large quantities of water. Use only products and methods suitable for the relevant sauna and wood surfaces. Aggressive household cleaners, pressure washing and permanently wet cloths can damage surfaces. Outside, inspect lower timber areas, joints, barrel bands, fittings and water drainage especially carefully. Remove leaves, soil and organic deposits so wood dries quickly after rain. Also check that doors close correctly and that no visible changes have appeared in the structure. Follow assembly and care instructions if anything is noticed; safety-related work on the heater, electrics or flue belongs with qualified professionals.

Assess internal height and bench area before buying

For size comparison, the more compact HC150 and HC180 models offer approximately 175 cm of internal height. In the N 210, the extra height makes entering, standing and moving easier. Because a barrel sauna ceiling is curved, maximum height is not available across the full width. Taller people should therefore also check the ceiling curve and bench positions in the product drawing.

The stated bench area of approximately 139 × 198 cm runs along the sauna room. Whether it suits your preferred sitting or lying position depends on height, number of users and bench arrangement. Before ordering, decide whether you will mainly sit upright, lie down at times or use the sauna with several people. Then compare these expectations with the product drawing and genuinely usable areas. External dimensions alone do not show how many people can use the sauna room simultaneously at your own comfort level.

It is best to walk through future use in its actual sequence: from garden to changing room, into the sauna room and back to the cooling area. Check where shoes and textiles will go, how doors open and whether several people can pass comfortably. This helps you identify early whether the N 210 layout suits your habits or whether a model with a differently divided interior would be more suitable.

Check circulation areas around the heater, doors and benches against the selected configuration. Add accessories only where all required clearances, necessary air circulation and walking routes remain intact. Consider not only use, but also access for cleaning, inspection and maintenance.

FAQ about the Bloomcabin N 210