Spacious barrel sauna with long interior benches for up to 6 adults
Bloomcabin LC 300 – spacious thermowood barrel sauna
The Bloomcabin LC 300 is a generously sized outdoor sauna for families, guests and regular sauna sessions. Its body is approximately 301 cm long and 194 cm wide, with interior benches of about 229 cm for up to 6 adults. It suits buyers who will regularly benefit from the added bench length while still leaving enough room at the site for access and installation work. Before ordering, decide on the usual group size, preferred sitting or reclining position, and the heating option that can be installed safely at the intended location. Depending on the configuration, the LC 300 is available with an electric or wood-fired heater. As electrical connections and wood-heater installations require different preparation, this choice belongs in the early site-planning stage.
Explore additional models in the Bloomcabin sauna collection.
Product overview
What makes the LC 300 distinctive
Room for up to 6 adults
The stated capacity describes a fully occupied sauna. If your group prefers more personal space, uses large towels, or likes to change position during a session, plan for fewer people in everyday use. This makes it easier to judge whether the LC 300 suits your usual sauna group and how comfortably the bench space will be used.
Approximately 301 cm overall length
A garden layout needs to account for more than the sauna’s length. Leave clear space for access, assembly and future inspections as well. At approximately 194 cm wide, the LC 300’s barrel shape may also suit narrower parts of a property, provided that walls, plants and other garden structures do not restrict the doorway, work area or pathways.
Interior benches approximately 229 cm long
Bench length is an important distinction from more compact barrel saunas. It allows more flexible seating and, depending on the user’s height, may also accommodate a reclined position. Before buying, mark out the length at home with a tape measure. It is a practical way to assess whether your preferred sitting or lying position will suit the interior.
Choice of electric or wood-fired heater
The heating system forms part of the ordered configuration. Choose it only after confirming which installation can be completed professionally at the proposed site. Electric and wood-fired heaters differ not only in use, but also in their connection or flue requirements, protective measures and ongoing care. The requirements of the specific LC 300 configuration are therefore decisive.
Materials and construction
Barrel construction in FSC®-certified thermowood
The LC 300’s heat-treated wood absorbs less moisture and is more dimensionally stable than untreated wood. That is valuable for an outdoor sauna, but it does not replace a carefully prepared site or routine checks. Wood remains a natural material, so variation in colour and grain, along with gradual colour change, is normal. Heat, cooling and changing humidity affect the interior, while the exterior is exposed to the weather. Water should not remain around the base or pool on individual surfaces. Good air circulation helps the barrel structure dry. Keep objects, covers and dense planting away from the outside walls so they do not trap moisture.
Inspect the barrel bands and structural connections regularly, especially after major weather changes. Look for even tension, loosened areas and other visible changes. Make adjustments only in line with the assembly and care instructions: tightening without a clear reason can be as unsuitable as ignoring a loose connection. Include the support points, door operation and transitions between timber elements in each check. A door that suddenly no longer closes freely may indicate uneven support. If deformation, unusual gaps or persistently damp areas appear, identify the cause first and check the base as well. Work on load-bearing or very hot areas should be left to qualified professionals. Do not use improvised replacement parts there.
Choosing the heater
Electric or wood-fired heater – selecting the right version
An electric heater offers convenient, predictable temperature control, but the intended site needs a suitable electrical supply. Before ordering, ask a qualified local electrical contractor to determine how the connection can be made, whether the proposed cable route is practical and what destination-specific approval checks apply to the exact heater and controls. Both components must match the selected LC 300 configuration; a unit chosen simply because it looks similar is not an appropriate substitute. Plan the position of electrical components, a protected cable route and future access for inspection and maintenance. Extension cords and temporary outdoor connections are not suitable for permanent sauna operation. The electric option may appeal to buyers who want controlled warm-up without storing fuel. Follow the documents supplied for the selected equipment and the electrical requirements that apply at the installation site.
A wood-fired heater produces heat from a manually managed fire. Supplying dry fuel, lighting the stove, monitoring the burn and removing ash afterwards are therefore part of regular use. The appropriate chimney arrangement and required clearances from hot components must be considered when selecting the site. The route to fuel storage should also remain dry, safe and usable in winter conditions. Firewood must not obstruct sauna access, required clearances or maintenance areas. Before lighting, check the firebox and air passages according to the heater manufacturer’s instructions. Remove ash only once it is completely cool, and store it in a suitable container. A wood-fired heater is therefore best for users who are prepared to take on the additional operation and maintenance.
Install only equipment intended for the ordered LC 300 configuration. Protective components must not be removed or replaced with parts that merely look similar. During operation, keep towels, sauna accessories and other combustible items away from the heater. Children and anyone unable to operate the heater safely require appropriate supervision. The instructions for the heater and controls actually supplied govern commissioning, heating, adding water to the stones, shutdown and maintenance. Before first use, confirm that all documentation for the exact equipment is available and that operation is fully understood.
Site preparation
Plan the base, drainage and access carefully
The LC 300 needs a level, permanently load-bearing base that supports every contact point securely and evenly. A surface can look level yet settle, shift, or change with frost and water under load. An existing patio is not automatically suitable; its construction and load capacity should be assessed by a qualified professional beforehand. Include the complete sauna, selected heater equipment and the later load from users in the planning. Do not level unevenness with loose pieces of wood or other temporary packing. A properly prepared base assists assembly, supports smooth door operation and avoids uneven loading of the barrel structure. The appropriate foundation solution depends on the soil, existing surface and local conditions, and should be settled before delivery.
Leave enough clear space around the sauna for assembly, inspection and future care. Barrel bands, lower timber elements and technical components must remain accessible. Too little distance from walls, fences or dense planting makes installation harder and prevents exterior surfaces from drying effectively. The path to the door should remain safe when wet and must not be narrowed by stored items or firewood. Also plan how components and tools will reach the prepared site without permanently blocking other garden areas. Assess access throughout the year and in poor light; wet surfaces and fallen leaves can make paths much less secure.
Effective drainage prevents rainwater or cleaning water from remaining beneath the timber structure. The base should direct water away without collecting it at the support points, entrance or neighbouring paths. Consider where water from the rest of the property flows after heavy rain. A lower, seemingly sheltered corner can be unsuitable if moisture collects there. Roof or garden drainage must not discharge directly onto the barrel sauna. The chosen solution must also suit local requirements and the actual ground conditions. After installation, inspect the area during rain to see whether puddles form or splashback repeatedly affects the same timber areas. Make site changes before moisture causes visible damage.
Choosing between models
LC 300 or LC 260 – which length suits your space?
The LC 260 is the shorter alternative and is also designed for several people. Mark out the exterior dimensions of both models at the intended location, while keeping the door area, access route, assembly space and maintenance space clear. This shows whether the LC 300’s additional length conflicts with walls, planting or other garden structures. Only when both layouts work in practice should interior use determine the choice. On a limited property, the LC 260 may preserve more circulation space; where space is available, the LC 300 provides a longer usable bench area. This helps you choose not simply the sauna that just fits, but the one that can be reached and maintained comfortably over time.
Assess the LC 300 around a typical sauna session rather than an occasional full capacity. Its approximately 229 cm interior benches allow a regular group to spread out more freely, while unused sections can make sitting down, standing up and changing position easier. Consider not only how many people can enter at once, but how much bench space your preferred seating arrangement actually occupies. If large sections are unused in normal sessions, the extra length offers little benefit. If the flexibility is regularly used, it is the key advantage over the more compact option.
If adequate clearance is possible for just 1 model, the site settles the choice. If both fit, use everyday bench needs as the deciding factor: the LC 260 suits a lower length requirement, while the LC 300 earns its advantage when additional bench room is needed regularly. Maximum capacity is only a reference point. What matters more is whether the selected length suits your usual group without taking more garden space than necessary.
Care and operation
Gentle care for the interior, benches and exterior timber
After every sauna session, allow the interior to air thoroughly and dry. Follow the product and heater instructions so residual moisture can escape and all intended ventilation features are used correctly. Remove damp towels, seat pads and swimwear promptly; textiles left on benches extend drying time and may encourage discolouration. During use, a sufficiently large towel protects the seating surface from direct contact with sweat and skin. Once the interior has cooled, remove loose residue with a soft brush or suitable cloth. Check beneath benches, in corners and near the floor, where moisture is easily missed. Close the sauna for a prolonged period only after all surfaces are dry. Persistent odours or recurring damp patches should not be masked with fragrances; instead, check ventilation, cleaning and water drainage.
UV exposure gradually changes thermowood’s colour and may cause natural greying. If you welcome that patina, exterior care can focus on cleanliness, drying and regular inspection. To preserve the warmer wood tone for longer, use only a care product suitable for exterior heat-treated wood. Read the manufacturer’s guidance on preparation and possible colour effect before application; a test area in an inconspicuous spot can help. Care products must not impair ventilation routes, fittings, seals or technical parts. Work only on dry, cool surfaces and never while the sauna is operating. Interior surfaces face different conditions from weather-exposed exterior timber, so exterior products must not be used in the sauna room without confirmation. Proper wood care aims to maintain the material, not to conceal every natural change.
Use gentle cleaning methods that do not raise the wood grain or leave residue in the warm interior. A pressure washer is unsuitable because its strong jet can force moisture into joints and damage surfaces. Avoid harsh, abrasive or heavily fragranced products as well. Remove dirt promptly, but only after the heater and interior have cooled completely. Cleaning products must be suitable for sauna wood or the relevant component and used sparingly according to their instructions. Metal parts, door components and technical equipment may have different care requirements. Before the next heat-up, all treated surfaces must be dry and free from cleaning residue. Regular visual checks of benches, floor areas, the door, barrel bands and support points help identify changes early.
Preparing your order
Confirm the configuration, delivery route and local requirements in advance
Review the delivery contents for the selected LC 300 configuration carefully. The heater, controls, sauna stones, chimney parts and protective components may be included differently depending on the configuration. Product images are not a reliable parts list. Compare the order summary with the technical details and clarify before purchase which components are supplied and which work must be arranged separately. For the electric version, this particularly concerns professional preparation and completion of the connection. For a wood-fired version, plan the full flue route and all necessary protective measures. Do not select additional components solely because connection dimensions appear to fit; confirm their suitability for the exact equipment. Arrange tools, assembly assistance and completion of the foundation in good time so installation is not interrupted by missing or unsuitable parts.
Delivery planning should cover both vehicle access and the separate move from an accessible unloading point to the prepared site. Consider driveway width, load capacity, gate openings, turns, slopes, steps, low branches, roof overhangs and other narrow points. Measure critical passages rather than judging them by eye. The route must suit the planned handling method and be clear of loose items. Decide where packaging and components can be stored temporarily without obstructing paths or placing wood directly on damp ground. Before delivery, the installation area should be complete, accessible and checked. If lifting or transport equipment is needed, allow sufficient room to manoeuvre. Check the product-specific delivery information to establish who is responsible for unloading and onward movement, and which equipment must be ready on delivery day.
Before settling on the site, identify the province or territory and the responsible local authority, then confirm the zoning, building-permit, setback and installation requirements for the property. Canada’s National Model Codes do not by themselves establish one approval rule for every project; confirm the code in force and the local permit route at the destination. The questions also vary with the selected heating method. For an electric heater, involve a qualified local electrical contractor early so the cable route and technical installation are established before assembly. For a wood-fired heater, confirm requirements for the appliance, chimney, fire protection and clearances with the responsible authority and qualified trades. Consider neighbouring buildings, property boundaries and existing services. Keep assembly documents, heater instructions and information about supplied components together after installation. These documents are needed for operation, care and choosing suitable replacement parts. See guidance on preparing for and using outdoor saunas.
Questions about buying and using
Bloomcabin LC 300 frequently asked questions
Can you lie down on the long benches?
Yes, depending on your height. The interior benches are approximately 229 cm long. Mark out this measurement at home before buying and check whether your head, feet and sauna towel fit within the usable length. Consider your preferred reclining position rather than comparing body height with bench length alone. When 1 person lies on a bench, fewer seated places remain. “Up to 6 adults” therefore assumes the sauna is occupied in seated positions; combine sitting and reclining only at a lower occupancy.
What should be checked before the first sauna session?
Assembly and technical installation must be complete before first use. Using the supplied documents, confirm that all specified components are fitted, connections have been checked and protective components are correctly installed. The door must operate freely, and tools, packaging and assembly debris must be removed from the interior. For an electric version, commissioning may begin only after the connection has been professionally completed and checked. For a wood-fired heater, the stove, chimney and fire-protection measures must be complete in accordance with local requirements and the manufacturer’s instructions. Before heating, become familiar with the guidance for sauna stones, ventilation and operation. Monitor the sauna closely during its first use. Unusual noises, smoke from unintended areas, electrical irregularities or impaired door operation are reasons to stop using it and have the cause assessed professionally.
Bloomcabin LC 300
Check the exact LC 300 configuration before ordering
Use the product page for a final review of your selected LC 300 configuration. Confirm that the heater variant, listed components and local professional work you have planned belong together. Resolve any open questions about the electrical connection or flue route, as well as unloading, onward transport and assembly, before purchase. Then keep the order summary with your planning documents. This allows everyone involved in delivery and installation to identify exactly what was ordered and which site preparations must be complete.
If the LC 300 is too long for the available space, or another interior layout better suits your usual use, explore further models in Bloomcabin outdoor saunas and barrel saunas.
