Thermowood Barrel Sauna

LCF 300 barrel sauna – a spacious sauna room with 210 cm interior height and a separate changing room

The Bloomcabin LCF 300 is a roomy barrel sauna for anyone who wants long benches and a sheltered entrance area. Its external dimensions are approximately 301 × 229 × 238 cm. The sauna room has about 210 cm of interior height, benches around 229 cm long and a volume of approximately 11 m³. It suits leisurely sauna evenings for 2 people, with family or with friends.

Its key strengths are the long benches, generous headroom and separate changing room. If you need a smaller footprint, compare this model with other Bloomcabin outdoor saunas.

Room to settle in and move freely

With an external length of about 3 m, the barrel provides extra seating and more room between the door, heater and benches. Before ordering, think beyond whether it fits the garden: consider whether the added space will be useful for several users, changing position or reclining on the long benches.

The approximately 210 cm interior height adds to its spacious character. Taller users can stand up comfortably, while the 229 cm benches support a choice of seated and reclining positions.

Even with several users inside, there is more space to change places or leave the sauna room.

Usable bench length matters more than a standard occupancy figure

When every seat is in use, the long benches provide continuous shared seating. With 2 or 3 people, everyone has considerably more personal space.

Depending on height, reclining at full length may also be comfortable. That makes the LCF 300 appealing to couples seeking more room than a compact sauna provides.

Your usual way of using a sauna is more important than a blanket number of users: mainly sitting upright, reclining, or sauna sessions with a group.

A place for dry textiles outside the sauna room

The changing room forms a sheltered link between the garden and sauna room. Dry towels, robes and small personal belongings do not have to stay in the warm, humid cabin.

This intermediate space is especially welcome in winter: when the outside door opens, cold air enters the changing room first rather than the heated sauna room.

Keep the passage clear and furnish the changing room sparingly. Hooks and a small moisture-resistant shelf are usually more useful than a large cabinet. Store anything not needed immediately before or after sauna use elsewhere, so access to the cabin remains easy.

The heater must be sized appropriately for the approximately 11 m³ sauna room

Correct heater output affects warm-up, temperature consistency and energy use.

With an electric heater, plan the heater, controls, supply cable and circuit protection as one system. Suitability of the available electrical service depends on the selected equipment, not cabin volume alone. Establish the cable route before assembly to avoid temporary wiring through the changing room or across busy paths. Keep controls accessible and clear of towels and outerwear, and follow each component’s documentation. Before installation, ask the electrical regulator serving the destination and a qualified electrical contractor to confirm whether the heater and controls are accepted there and what permit, notification or inspection steps apply.

For a wood-fired heater, plan fuel access, chimney or flue routing and combustion air as part of the site layout. Position the sauna so firewood can be brought in, ash removed and the heater used conveniently. Select and install the heater, chimney and specified protective components in line with their manufacturer instructions and the rules that apply at the property. Before installation, ask the relevant municipal and fire authorities about permits, chimney or flue clearances, smoke rules and current fire restrictions. Sorting this out only after assembly can make alterations to the barrel wall, changing room or surrounding area much harder.

Choose the heat source around your routine

An electric heater suits users who prefer sauna time without firewood or manual lighting, with temperature set through the intended controls.

A wood-fired heater suits those who see lighting the fire as part of the sauna ritual. Firewood, flame and manual adjustment reinforce the traditional barrel-sauna experience.

Decide on the heat source before final positioning. Electrical supply or chimney routing can affect the barrel orientation and the clear routes needed around it.

Plan the area in front of the sauna for how you will use it

When several people use the LCF 300, the space outside the entrance quickly becomes a changing zone between sauna time, cooling down and resting.

A pergola or covered patio can provide room for seating, drinks and dry textiles. An outdoor shower or plunge pool should be reached by a short, slip-resistant route. Arrange the cool-down area so water runs away from the foundation and wooden structure. Leave enough room in front of the door for it to open fully. Path lighting makes evening use easier and should be considered early in outdoor electrical planning.

The changing room remains available as a dry transition space; cooling down, drinks and longer rest periods belong in the planned outdoor area.

When is 37 cm of extra external length worth choosing the larger sauna?

The LCF 260 has the same height and width, but is shorter.

The LCF 300 primarily offers longer benches and more day-to-day space. Regular group use or a preference for reclining makes that difference particularly valuable.

Where the site is tight and 192 cm bench length is sufficient, the LCF 260 is easier to fit into a smaller garden.

Separate changing room or more sauna-room space?

The HCF 300 has no changing room and uses more of its barrel length for the sauna room itself.

The LCF 300 instead provides a sheltered transition area while retaining very long benches. This is particularly useful for year-round sauna use.

Choose the HCF 300 if maximizing heated sauna-room space is your priority. Choose the LCF 300 if a separate place to change and keep dry textiles matters more.

The base must support this long barrel sauna evenly over time

The sauna structure, heater equipment, sauna stones and users place a substantial load on the base. It must carry that load evenly to prevent the barrel from distorting. Before work begins, assess whether the ground is level and load-bearing, and whether soft areas or future settlement are likely. A garden surface can look level yet still be unsuitable. The support points specified in the assembly documentation must also be positioned correctly. An uneven base can affect door operation or load components unevenly.

If installing on an existing timber deck, confirm that it can safely carry the additional load. Depending on the site, a concrete slab or professionally built foundations may be more appropriate.

Also provide drainage and air circulation beneath the sauna. Rainwater and cleaning water should drain away from the structure rather than collecting around lower timber elements. Check the fall of adjacent surfaces too: neither garden nor patio should direct water toward the sauna. Keep the base accessible for inspection and maintenance. Leaves, dirt and standing moisture are easier to miss behind a fully enclosed skirt.

Prepared components simplify access, but assembly needs space and helpers

The LCF 300 is assembled on site from prepared components. This allows individual parts to pass through access routes too narrow for a fully assembled sauna.

Before delivery, check the unloading point, full carrying route and available assembly area. Besides the narrowest passage, consider corners, steps, slopes, gates, roof overhangs and low branches. Long or bulky parts need extra turning room while being carried. Keep sufficient working space around the structure, which is about 3 m long, throughout assembly. Store components in a dry, orderly place until installation; do not rest vulnerable edges directly on wet ground. An organized layout reduces unnecessary handling and makes parts easier to check.

Level the base and align the sauna body carefully before later components make corrections difficult. A misplaced partition or unevenly aligned barrel can affect door function, connections and panel fit. Tighten connections in the specified sequence and check each assembly stage against the instructions. If a door opening does not fit, do not force it; first check the alignment. Install the heater and other fittings only after the structure is correctly positioned.

Comfort for cottages and rental properties needs clear operating routines

The LCF 300 can suit cottages and premium rental properties because its changing room and long benches offer ample space for different users.

For rental or commercial use, check applicable safety, hygiene, maintenance, insurance and operating-instruction requirements.

Between stays, inspect cleanliness, complete drying, and the condition of benches, floor, doors and controls.

A regular routine makes the cabin, changing room and exterior easier to maintain

After each sauna session, ventilate and dry the sauna room and changing room thoroughly. Remove damp textiles, empty used containers and do not leave wet items on benches or the floor. Pay particular attention to bench undersides, corners and joints where moisture dries more slowly. Keep ventilation openings clear. Close the sauna for an extended period only after the changing room is dry and no moisture has been tracked in from the garden.

Clean the long bench surfaces regularly using a method suitable for the materials. Sauna towels reduce sweat and dirt on the wood but do not replace cleaning. Use only products appropriate for the installed timber surfaces and avoid soaking them unnecessarily. Bench edges, frequently touched areas and the floor in front of the seats deserve extra attention. Let the cabin dry completely afterwards. Avoid aggressive or strongly scented cleaners that could leave unpleasant residues when heated. Always follow the care guidance for the product and component documentation.

Remove dirt, leaves and other organic debris from the exterior regularly, especially near lower edges and slow-drying areas. Keep plants far enough from the timber construction and inspect surfaces for visible changes. Check barrel bands, doors, fittings and the junction between changing room and sauna area. Assess changes in barrel-band tension against assembly and care instructions; tightening them prematurely is not advisable. Early attention to dirt or misalignment is usually more effective.

The LCF 300 is for buyers who value comfort over the smallest possible footprint

It is especially suited to families, groups of friends and couples who expect to use the long benches and separate changing room regularly.

Those who usually sauna alone and have limited space may plan more efficiently with a smaller model.

The LCF 300 is not automatically better than a smaller sauna. It is the considered choice for anyone needing a tall cabin, extensive bench space and a sheltered transition area.

Despite its size, the sauna should feel like a private garden retreat

The LCF 300 is more prominent in a garden than a small barrel sauna, so consider its position, entrance direction and planting carefully.

The entrance can face a sheltered patio or a less visible part of the garden. Hedges or slatted screens can add privacy without enclosing the sauna completely. Consider the route from the house as well: it should be easy to use and not cross wet beds or difficult ground. Screening must not obstruct the door or access for maintenance. Heater type, possible chimney routing and planned connections must also suit the chosen orientation.

Leave enough air and clearance around the barrel for inspections and maintenance. Dense planting against the timber can make drying and upkeep more difficult.

Set out clear storage places for shared sauna time

For several users, designated hooks or storage spots are helpful. Personal items stay separate and the passage remains clear.

Do not use the space immediately by the door and passage as storage, so people entering and leaving do not obstruct one another.

Before beginning, decide where shoes, drinks and damp textiles will go. Then there is no need to rearrange anything during the sauna session.

Clear responsibilities help with changing users

Where guests or renters use the sauna, provide a short, clearly visible guide covering use from opening up to the final check. It should also be clear who is responsible for checking the sauna after the last session.

With a wood-fired heater, clearly establish who may manage the fire and chimney. Operate an electric heater in accordance with its control and heating-system instructions.

The guide should also explain how to ventilate and leave the sauna room and changing room to dry after a busy evening.

Agree on sitting and reclining places before sauna time

With only a few people, the LCF 300 offers plenty of separation and freedom of choice. With a larger group, the long benches function as continuous shared seating.

If someone wants to recline, reserve sufficient bench length before starting. This avoids constantly redistributing sitting and reclining places during the session.

A quick discussion is particularly helpful for mixed use: clear sections of bench make it easier to change places and prevent towels from taking over the entire seat.

The changing room is not intended for large firewood stores

If you operate the LCF 300 with a wood-fired heater, keep dry firewood in a suitable separate area.

The changing room is intended for changing and small personal belongings. Large wood stacks take up circulation space and do not belong close to hot heater components.

For regular wood-heater use, a sheltered garden shed or dedicated wood store a short distance away is much more practical.

Winter use: keep the changing room and rest area separate

Keep the changing room clear in winter too, so people can move promptly in turn between the sauna room and outdoor area.

Take longer breaks outside the changing room, leaving the passage free and dry textiles protected.

On winter evenings, a short weather-protected route is particularly pleasant, so nobody has to wait for long in an open garden wearing a robe and towel.

The larger sauna room calls for realistic preparation

How long the LCF 300 takes to heat depends on the heater, outdoor temperature and desired sauna temperature. A single stated warm-up time would therefore be unreliable.

For frequent use, electric controls can simplify preparation. With a wood-fired heater, lighting it in good time is deliberately part of the routine.

If you often want to use the sauna at short notice, practical operation should carry more weight than the atmosphere you prefer when selecting a heat source.

Coordinate delivery, documentation and related work before assembly

Before assembly, check the delivery for completeness and visible transport damage. Identify components against the order and assembly documentation, and do not dispose of packaging until all small parts have been found and matched. Document anything unusual while components are easy to access. Keep the documentation for the sauna, heater, controls and other components together, so operating, care and possible wear-part information is easy to find later.

Also coordinate the order of work. The sauna body must be correctly positioned before connections and heating equipment are finalized. However, cable routes, penetrations and planned chimney routing should be established beforehand so assembled parts do not need later modification. Keep the assembly area clear of packaging and unused tools. Finally, check doors, connections, fittings and controls against their respective instructions.

Correct assembly, together with suitable heater and protective components, is important for reliable sauna operation.

FAQ – Bloomcabin LCF 300